SciQuip Oven-S Series User Manual
  1. Manuals
  2. Brands
  3. SciQuip Manuals
  4. Oven
  5. Oven-S Series
  6. User manual

SciQuip Oven-S Series User Manual

Blast air oven
Hide thumbs

Advertisement

Table of Contents

Enlarged version
Please read this Guide attentively before using and be
careful of keeping the Manual in case of contingent use
.
User's Manual
Oven-S Series
Blast Air Oven
This Manual applies to:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Oven-S Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SciQuip Oven-S Series

Summary of Contents for SciQuip Oven-S Series

  • Page 1 Please read this Guide attentively before using and be careful of keeping the Manual in case of contingent use User's Manual Oven-S Series Blast Air Oven This Manual applies to:...
  • Page 2 Safety instruction! Please be sure to follow the instructions, which are Attention! really important for your safety. Instructions to keep the normal life and proper operations of the equipment! Danger! (Warnings against likely injury or death.) 1.The unit must be placed horizontally on solid, flat floors. 2.The unit must be provided with sufficient clearance on all sides of the unit, at least 20cm.

  • Page 3: Table Of Contents

    1.Key features Table of contents 1.Individualized 10 segments, 18-step preset programmes achieve temperature preset timing programs or reciprocating, stepped, ladderlike temperature running. 2.Sound heat insulation design and the transparent glass door meet European security standard. 1.Key features 3.Automatic poweron and poweroff, timing operation, clock indicating, poweroff recovery, 2.Technical Specifications parameter recalling and encryption, temperature indicating and correcting, RS-232 interface and built-in microprinter.

  • Page 4: Technical Specifications

    2.Technical Specifications 3.Control Panel Illustration of Control Panel Heating indicator Refrigeration indicator Temperature exceeding alarm indicator Increase button Decrease button Graphic chart display button Oven series (Heater is on the back of the chamber, horizontal air-flow) Operating button Oven-30S Oven-55s Oven-110S Oven-210S Operating status indicator...

  • Page 5: Preparation And Start-Up

    4.Preparation and Start-up button: Press this button to change the parameter 1.The unit must be placed horizontally on solid, flat floors and provided with sufficient clearance on all sides of the unit, at least 20cm. Increase button: Press this button, the parameter will increase by one digit, the parameter will keep increasing while this button is held on. 2.Configuration of power supply of AC 220~240V 50/60Hz and capacity not less than the corresponding value in technique specification with socket reserved for the use of this equipment.

  • Page 6: Setting Of Parameter Under The

    6.Setting of parameter under the constant temperature control mode 6.Setting of parameter under the constant temperature control mode 3. For the program with less than 10 segments, user should set a terminating point for the whole program; simply press "Decrease" to set the "RT" of the followed idle segment as "end", then the 1.Set temperature&running time whole program terminates there.
  • Page 7 Simplified instruction on the setting of program control time and temperature Hold on for 3 seconds Segment "Ramp Time" (RT) Change/Confirm Increase Change/Confirm Increase Decrease Change/Confirm Increase Decrease button button button button button button button button Segment 1 Segment 1 "Segment 2 "Ramp End "Hold Time"...

  • Page 8: Setting And Application Of Other Functions

    8.Setting and Application of other functions 2.Setting of the clock Press the SET key and enter the password 4 . The clock time can be changed when deviation between clock time and standard time occurs. Illustration of overtemperature alarming value setting Press the SET key and enter the password 4 .Press the SET key again to enter into the temperature setting function.

  • Page 9: Operation And Switch Off

    9.Operation and Switch off 3. Power-off recovery This equipment has power-off recovery function. When the external power is recovered after a sudden cut off and the deviation of temperature inside is within 2 , the equipment can automatically recover to run according to the originally designed programme.

  • Page 10: Normal Malfunction And Debugging

    11.Normal Malfunction and debugging Encountered symptoms Debugging Possible cause Check the power supply system to see if there is voltage 1.Power supply is not connected. Plug the equipment firmly 2.Block have access to jack socket Power on without display Turn on the power switch on the right side of the equipment 3.The power switch have not been turned on Replace the fuse with new one of same specification 4.The fuse is broken...

This manual is also suitable for:

Oven-30sOven-55sOven-110sOven-210s

Table of Contents