Advertisement
Quick Links
Error messages
Should any of the symbols shown below appear in the LCD, they have the
following meaning:
The weight capacity of the scale has been exceeded.
When the input voltage is less than 7V, LO pops up in the LCD at
the scale's restart.
Interface with Stamps.com or Endicia.com
This scale is compatible to the stamps.com and endicia.com internet postage. For
this connect the scale with the cable supplied.
Note: The driver of the scale required to interface with the stamps.com internet
postage software can be free downloaded from the stamps.com web page.
http://www.stamps.com/support/store/downloads/
Plus 10lbsi
ELECTRONIC POSTAL SCALE
Max. 10lbs d = 0.1oz
OPERATING MANUAL
TECHNICAL DETAILS
Tare up to the scale's overload range.
Operates either on a 9V alkaline battery or 9V AC power adapter (supplied).
Load cell technology
Liquid crystal display
Capacity 10lbs.
Graduation 0.1oz.
Auto switch-off after 4 minutes of non-use without weight.
Totally automatic four points calibration.
Connects with the pc for the internet postage.
Advertisement
Summary of Contents for Scales-R Plus 10lbsi
- Page 1 Should any of the symbols shown below appear in the LCD, they have the following meaning: The weight capacity of the scale has been exceeded. Plus 10lbsi When the input voltage is less than 7V, LO pops up in the LCD at the scale’s restart.
- Page 2 Unpacking and Assembling your scale Be sure that the scale is operated on a flat surface Unpack the scale and take out the pieces of shock protector inserted in between In order to operate correctly, the scale must be installed on a firm, flat surface. It the platform and the scale.
Need help?
Do you have a question about the Plus 10lbsi and is the answer not in the manual?
Questions and answers