Advertisement
Quick Links
Advertisement
Summary of Contents for Oerad Concretto
- Page 1 Concretto Full System USER MANUAL Wall Penetrating Radar...
- Page 2 Safety Information Thank you for purchasing this Oerad equipment. Please read this User Manual carefully before connecting, operating or adjusting this product. Electromagnetic radiation from GPR systems manufactured by Oerad Tech Ltd do not constitute a safety or health hazard under normal operating conditions.
- Page 3 Concretto system is designed and manufactured by Oerad Ltd. What Concretto is used for The Concretto has a wide variety of usages including but not limited to underground utility detection, non-destructive concrete structure analysis, rebar detection, road inspection, cracks and faults localiza- tion in concrete and asphalt structures, wire and pipe mapping in buildings, etc.
- Page 4 Frequency Bandwidth 200 MHz - 4000 MHz Central Frequency 2000 MHz Operating Time Windows 7.5 ns / 14 ns Dynamic Range 120 dB min Horizontal Resolution 0.001 m Vertical Resolution 0.001 m Pulse Repetition Frequency 1 MHz Pulse Length 600 ps Pulse Energy 30 V Pulse Rise Time...
- Page 5 1. Concretto WPR Main Module 2. Handle 3. Extension stand 4. Extension handle head 5. Extension handle 6. Short Assembly bolts x 3 (for extension stand) 7. Long Assembly bolts x 3 (for extension handle)
- Page 6 1. Secure handle position with two short bolts. 2. Secure handle extension stand with three short bolts. 3. Attach extension head to the handle extension hand either vertically or horizontally. Secure with two long bolts. Attach extension handle.
- Page 7 1. Battery level indicator: • Green - battery full; • Yellow - battery medium level; • Red - battery getting low; • Red blinking - you need to recharge your WPR. 2. Sockets for handle and extension handle stand. 3. Indication of horizontal centre of emitted wave. 4.
- Page 8 GPR and disconnect it from your tablet when finished surveying. � For further details on technical specification requirements, how to download, install and configure the Oerad App, please refer to the app’s user manual available at https://oerad.eu/software . Operating Modes � Survey Real time data visualization and recording.
- Page 9 • Place GPR at beginning and start it up. • Navigate to the Calibration menu in the Oerad app via settings or on its initial start up screen. • Press Start and allow the Oerad App access to the USB device if prompted.
- Page 11 Y-Axis showing penetration depth expressed in Survey parameters toggle - open / close the nanoseconds or meters/feet. parameters menu on the left. Radargram streaming live data from the GPR. Pause / Resume survey. Double tap anywhere on it to pause/resume Time window toggle - toggles between the GPR surveying.
- Page 13 Open new file. Files generated by Oerad are Radargram of the recorded sounding data. Tap usually located in main storage in folder Oerad. and swipe right to navigate to the end of the file. Tap and swipe left to navigate to the beginning of Apply background removal filter.
- Page 14 This may result in radargram deteriora- tion. • Concretto is suitable for levelled materials and terrains where the back wheels can touch the surface simultaneously. • Concretto needs to be calibrated to be used with distance measuring enabled.
-
Page 15: Time Window
Its data from 1973. properties are length, power ERAD - Oerad’s open radar for- rise time a measurement of how mat optimized for small data fast a pulse achieves peak power. storage. - Page 16 The max depth of EM waves in the frequency range 10MHz - 1GHz: where D - max depth; t - time window; Ɛ - dielectric constant.
- Page 18 Oerad Tech Ltd (+39) 392.92.07.751 Svoboda 69E, Plovdiv 4000, Bulgaria Italy...