Advertisement
Quick Links
Advertisement
Summary of Contents for Mistbox Mistbox
- Page 1 Mistbox User Guide...
-
Page 2: Table Of Contents
............... . . YOUR MISTBOX’S SERIAL NUMBER You will need to refer to Mistbox’s serial number when creating an account in the Mistbox app or when contacting customer service. The serial number is printed on the smaller removable sticker located on the back of your unit. -
Page 3: Introduction
Mistbox filter. (Please refer to the support section of our website to find more information.) You will need Wi-Fi and an iOS or Android phone in order to use the Mistbox app and receive energy usage information. -
Page 4: Setup And Installation
3. Choosing a Location When installing a Mistbox control unit, choose the side of the AC unit that has maximum exposure to sunlight. If installing multiple Mistbox control units on AC units in close proximity to each other, use the illustrations below to determine mounting locations. - Page 5 Screw the Wi-Fi antenna on the antenna jack located on the top right of the control unit. Then attach the Mistbox control unit on your AC unit using one of the two methods below. When mounting Mistbox, the control unit should be mounted as far to the left as possible on the chosen side of the AC unit to allow room for the spray bar on that side.
- Page 6 5. Mounting the Mistbox Spray Bars Insert the valve on the end of the spray manifold into the bottom of the Mistbox filter. Mistbox spray bars can easily be attached using the provided clips or zip ties. Start by mounting the spray bar closest to the Mistbox control unit.
-
Page 7: Connecting Mistbox To Wi-Fi
CONNECTING MISTBOX TO WI-FI Ensure the Wi-Fi antenna has been installed on the Mistbox control unit. To connect Mistbox to Wi-Fi, simply follow the Wi-Fi setup tutorial on the Mistbox app on your smartphone or tablet. You’ll be prompted to set up Wi-Fi when creating your account in the app, but the Wi-Fi setup tutorial can also be found in the support tab. -
Page 8: Mistbox Operation
3 seconds will initiate a 30 second misting test. Filter Button When replacing the Mistbox filter, use this button to reset the filter life. Press the button and hold for 3 seconds. Mistbox will beep to let you know the reset is complete. Water Button Hold this button for 5 seconds to enter Wifi provisioning mode. - Page 9 Wi-Fi Setup If this icon is solid, Wi-Fi is not set up. If blinking, Mistbox is in Wi-Fi setup mode. If not present, Wi-Fi is set up correctly. Water Saver Mode Indicates if Mistbox is in water saver mode.
-
Page 10: Mistbox Maintenance
1/4”. 5. Press and hold for 3 seconds. Mistbox will make a beeping sound to notify you that the filter life has been successfully reset. The filter life icon should show full life. Occasional Inspection We recommend you occasionally verify the system is in proper working order. -
Page 11: Mistbox Support
Due to treatment of the water by the Mistbox filter, this film can usually be washed away with a garden hose. You should also occasionally spray down your AC unit to keep it clean, as recommended by AC manufacturers. - Page 12 mistbox.com...
Need help?
Do you have a question about the Mistbox and is the answer not in the manual?
Questions and answers