1. Manuals
  2. Brands
  3. MB MACHINE Manuals
  4. Power Tool
  5. BLADE PRO
  6. User manual

MB MACHINE BLADE PRO User Manual

Lawn mower blade sharpener
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BLADE PRO LAWN MOWER
BLADE SHARPENER
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLADE PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for MB MACHINE BLADE PRO

  • Page 1 BLADE PRO LAWN MOWER BLADE SHARPENER User’s Manual...

  • Page 3: General Safety Guide

    F. Read this manual in its entirety before installation and use of this product. INSTALLING THE SHARPENER We have designed the Blade Pro Sharpener so that it can be mounted in different configurations depending on your need and work area. It can be mounted: A.

  • Page 4: Preparing The Grinder

    ANGLE BRACKET VISE PREPARING THE GRINDER REMINDER: Make sure your grinder is turned off and unplugged. A. Take the Guide Rod included with this product. B. Screw in the threaded end of the Guide Rod into the handle attachment hole of your grinder. This is the threaded hole located on the right side of your grinder.
  • Page 5 SHARPENING YOUR LAWN MOWER BLADE REMINDER: Make sure that your blade is completely clean and dry before sharpening. A. Attaching the Blade to the Sharpener Clamp 1. Unscrew the vise handle to open the vise wide enough to allow the blade’s width to fit. VISE HANDLE 2.
  • Page 6 B. Attaching Small Blades to the Sharpener Clamp The vise can be turned around to be able to fit blades of smaller width. 1. Unscrew the vise handle until it is fully detached from the clamp. 2. Remove the outer half of the vise by sliding it out of the assembly. Unscrew and remove Vise Handle Remove Vise...
  • Page 7 C. Attaching the Grinder to the Guide Arm REMINDER: Make sure your grinder is turned off and unplugged. 1. Take the grinder with the attached Guide Rod. 2. Insert the smooth end of the Guide Rod through the pivot hole of the Guide Arm. 3.
  • Page 8 D. Sharpening a Standard (Straight) Blade REMINDER: Wear the proper safety equipment such as goggles and ear plugs during sharpening. NOTE: We recommend using a 36 or 60 grit flapper wheel for sharpening. Using a hard disk is not recommended. 1.
  • Page 9 E. Sharpening Mulching (Dual Angle) Blades 1. A mulching blade has different angled edges on each blade side: 2. When sharpening a mulching blade adjust the position of the vise handle to either “Low” or “High” position based on the angle. LOW POSITION HIGH POSITION F.

  • Page 10: Other Tips

    NOTE: DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED. To make a claim, write to MB Machine LLC at the address below. Customer Service will inform you of the appropriate procedure to follow. The Warranty Card together with the sales receipt must be presented when Warranty Services are required.
  • Page 11 • Your name and address • A description of the problem All repair work will be done by MB Machine LLC or its authorized agents. Any replaced defective parts will not extend this warranty period. Service under warranty will not extend this warranty period.
  • Page 12 MB MACHINE LLC Address: 1430 Enterprise Ave. Myrtle Beach, SC 29577 Contact: mbmachinellc@gmail.com...

Table of Contents