Westinghouse VK-40F580D User Manual page 59

Picture is not clear.
Picture turns pale or improperly tinted.
Picture is too dark.
Remote control does not work.
Stripes on the screen or colors fade.
The signal strength may be weak.
Program provider may be experiencing difficulties.
Check if cable connection is loose or not.
Check the Hue, Saturation and Color setting parameter and apply necessary
adjustment.
Restore to factory default setting and check picture quality again.
Select a different APC mode.
Check the Brightness in Picture Settings.
The fluorescent lamp may have reached its life end.
Contact an authorized service center to extend a service.
Install new batteries.
Make sure the remote sensor window doesn't covered in any means.
Make sure the remote is tuned to the correct device input (if it's universal
remote uses to command the TV. (Noted, universal remote is excluded from
standard accessory pack.)
It probably interferes with any electronic appliances.
It probably interferes between video source cable and the power cable.
Please separate it apart.
Make sure power and video cable don't wind around each other.
Check the Hue, Saturation and Color adjustments.
57