Related Manuals for DAKtel DT-7X
Summary of Contents for DAKtel DT-7X
- Page 1 DT-7X MULTI-FUNCTIONAL SMART HOME SYSTEM USER MANUAL OPTIONAL ACCESSORIES OPTIONAL ACCESSORIES LOW POWER DECT TERMINALS RF TRANSCEIVERS...
-
Page 2: Package Contents
DT-7X MULTI-FUNCTIONAL SMART HOME SYSTEM USER MANUAL PACKAGE CONTENTS: (depend on the order. Base, handset, communicator and low power transceivers delivered in separate boxes) • 1X 4G LTE / DECT / LOW POWER RF HUB (with 5000mAh battery) • 1X power adapter 900mA OPTIONAL PARTS •... -
Page 3: Highlight Features
HIGHLIGHT FEATURES • SOS / Alarming (up to 6 numbers running in a loop) • ContactID alert messages (under PSTN and Cellular) • SMS alert messages (under cellular) • 8 sec automatic line disconnecting (under PSTN) • Room monitoring (with MIC and SPK control) •... - Page 4 DECT HANDSET Front side Back side Menu / Ok Receiver Display Off Key Amplifier Main Keys Speaker Ring Mute Up/Down Keys Pause Talk Key Intercom / Delete Key Lock Battery Door Microphone Speaker 4G LTE / DECT BASE Front side Back side Leds indications 1.
- Page 5 BASE BUTTONS / OPERATIONAL Base back side has 5 sockets for: • PSTN line: For landline connection • PAGE button: To call another terminal or terminals registration mode • UNIT ON/OFF switch: The switch must be ON at all time allowing the system fully operational •...
- Page 6 Menu/ok to confirm. • Once finished you will hear a short sound for the confirmation and now you can connect any device that support Wi-Fi to your personal DT-7X hotspot. GENERAL HANDSET MENU Press the MENU/OK to enter the menu. Roll down or up using the arrow keys to move the crosser in the menu.
-
Page 7: Phone Book
CALL LOG Allows to check the dialed or received calls with date and time. You can also delete a single item or all the items or add them to the Phone Book (add to PB). To choose an action press the MENU/OK button. PHONE BOOK Phone book contains: list of stored names and numbers (you may also enter a direct character for a quick search), NEW ENTERY (storing a new name and number to phonebook), EDIT RECORD (editing... - Page 8 LANGUAGE The language in this section is for the voice announcements (total 3 voice prompt announcements), for Communicator Low Battery, SOS call and ECI mode (access code). WLAN SETTINGS (FOR THE WI-FI) As explained above PP SET UP You may modify any of the DECT terminals (handsets or Communicators) which are registered to the base with: INT (internal) ring: the internal ringing melody and volume what does internal and external mean EXT (external) ring: the external ringing melody and volume...
-
Page 9: Wireless Accessories (Optional)
WIRELESS ACCESSORIES (OPTIONAL) In the menu: Fall Detection Pendant Wrist Rendant Emergency Rull Cord You can register a new accessory, modify or delete. IMPORTANT NOTICE: The Low Power RF Transceivers are optional. However: the base already supports the low power RF platform (RF433) RF ACCESSORY REGISTRATION: 1. -
Page 10: Base Default
MAKING ALARM FROM RF ACCESSORY • Once alarm is triggered, the call will be connected from the base audio channel (will follow with 4 tones alarm sounds from base) Fall detection sensitivity levels 1. The fall detection has 3 levels for sensitivity, for user/s. please follow as below to adjust the sensitivities levels to meet the user/s requirements 1.1 Technician (MENU*1006) mode only: please contact us for more details! •... - Page 11 HANDSET OPTION ALARM: You may set the alarm clock to ring in a certain time. To operate this feature, select ON and enter the time by using the number keys. Once selecting the time, press MENU/OK to confirm. When the alarm clock is active (ON), an icon will appear on the main display in standby mode.
-
Page 12: Sos Settings
HS DEFAULT: By selecting HS default you will need to enter the pin code (0000). Once confirming all the default setting the base will return to the original manufacturer settings! It is not recommended to base default unless it is instructed by your provider or agent. SOS SETTINGS By selecting the SOS settings, you will need to insert the pin code (0000) and press MENU/OK to confirm. -
Page 13: Sms Alert
AFTER the call from the base is finished. B. SMS ALERT DT-7X series supports SMS alert messages SMS alerts is under the SOS MENU. Please follow the below instructions to activate the SMS alerts 1. Under the SOS menu, go to SMS alert and press menu/ok 2. -
Page 14: Daily Check
7. Press menu/ok again and insert the telephone number where you wish the SMS alert for the daily check to be sent to. D. SOS VOICE In the DT-7X series you can turn ON or OFF the voice prompt announcement to the call party. -
Page 15: Prior Number
PRIOR NUMBER The Prior (priority) number feature allows you to preset desired numbers to be recognized by CALLER ID. These numbers will be stored and any call from these numbers will be answered automatically after first ring without any need to press any button! to preset a Prior number, you will need to enter a pin code (0000) and press MENU/OK to confirm. - Page 16 Press and hold the PAGE button on base backside for approx. 4-5 seconds till the red LED on base start flashing. For additional Communicator registration, press one time on Communicator SOS button. A successful registration will be followed by a HIGH TONE heard from the Communicator. For additional handset registration: press MENU/OK on handset, select registration, press MENU/OK again, select base (1-4), press MENU/OK, enter the code (0000), press MENU/OK, the handset will start searching for the base.
-
Page 17: Additional Features And Information
ADDITIONAL FEATURES AND INFORMATION SPEED DIALING The handset can support up to 9 speed dialing numbers (operated by a single long press). To operate this function Please follow the below instructions: Under standby mode, insert a number. The number will appear on the screen: for example, 22557799. -
Page 18: Conference Call
You can make a conference call using 1 external line and 2 internal lines. When a call has been made to and or from the DT-7X handset and had been answered, press and hold the R/INT button on handset till the display will indicate the other terminals registered to the base, then select the terminal you want to join in the call (conference), answer the internal call of the third terminal, then press * button on the handset the 3 parties are in conference. - Page 19 DECT COMMUNICATOR/S (OPTIONAL) Up to 5 alarm Communicators can be registered to the 4G / DECT base. Registration (Make sure the communicator is ON, the blue LED on the side either flashes or steady) 1. Long press on the base PAGE button till the base red led flashes 2.
- Page 20 4.1 INT (internal) EXT (external) Ring: to select the communicator melody type and volume (1-5) 4.2 Vibrating: to select the communicator vibration alert ON or OFF 4.3 Audio setup: to select the communicator speaker volume (1-5) Internal call: (handset to communicator) 1.
-
Page 21: Main Features
MAIN FEATURES • Personal security alarm unit • SOS • 2 Way Voice communication • IP65 water protection (shower use) • Selectable ringing and vibration + mute • Lanyard cord and belt clip options • Low battery alert with voice (support 8 languages) •... - Page 22 INTELLIGENT CONNECTIVITY WITH TECHNOLOGY COMBINATION www.daktelasia.com...
Need help?
Do you have a question about the DT-7X and is the answer not in the manual?
Questions and answers