SAFETY PRECAUTIONS Read all instructions before assembly and use of the travel cot. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS TRAVEL COT, READ AND UNDERSTAND THE INSTRUCTIONS. DO NOT USE MATTRESS OTHER THAN THE ONE SUPPLIED BY THE MANUFACTURER. INCORRECT MATTRESS CAN CAUSE DEATH.
Page 3
SAFETY PRECAUTIONS WARNING SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE AND ON SOFT BEDDING. USE ONLY THE PAD PROVIDED BY MANUFACTURER. NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING. NEVER leave your child unattended. To prevent serious or fatal injury from falls always keep child within arm’s reach.
Page 4
CONGRATULATIONS Congratulations on your purchase of the In & Out Travel Cot - Black Silver. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
Page 5
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. Supplied loose in box: Travel Cot Frame Bassinet Mattress Mattress Cover Canopy Carry Bag There are no accessories recommended for use with this bebe care In & Out Travel Cot.
Page 6
ASSEMBLY / OPERATING INSTRUCTIONS To assemble Travel Cot Frame... Take the contents out of the Carry Bag. Open the Travel Cot Frame and lay it down on a flat surface with the legs facing upwards. Lift each leg outwards and slide it into the coupling on the frame.
Page 7
ASSEMBLY / OPERATING INSTRUCTIONS To insert Travel Cot Mattress Base... Slide the Mattress into the Mattress Cover. Secure with 2 x elastic straps. Fold the left and right sides of the Mattress toward the middle. Insert the Mattress on the diagonal into the Travel Cot.
Page 8
ASSEMBLY / OPERATING INSTRUCTIONS To attach Bassinet... Connect the Bassinet to the Top Frame of the Travel Cot by sliding 6 x plastic clips over the frame. Clip the plastic corner tabs to the legs, making sure to keep the press studs exposed. Connect the top of the Bassinet liner to the legs using the press studs.
Page 9
ASSEMBLY / OPERATING INSTRUCTIONS To attach Canopy... Lay the Canopy over the Travel Cot and attach it to each corner using the press studs. To Disassemble... Remove the Canopy. (if fitted) Remove the Bassinet. (if fitted) Fold the Mattress toward the centre, lift and remove on the diagonal.
Page 10
ASSEMBLY / OPERATING INSTRUCTIONS To Disassemble continued... Press the push pin release tab on the Frame and lift the leg upwards. Fold leg inwards. For the most compact fold, fold the left rear leg. Then fold the left front leg. Fold the right rear leg.
Page 11
ASSEMBLY / OPERATING INSTRUCTIONS To pack into Carry Bag... Fold the Mattress towards the centre and slide it into the Bag. Be sure that the flat side of the mattress when folded, slides in first. Slide the folded Cot between the mattress sides. Slide the Bassinet into the Carry Bag between the Mattress and the side of the Bag.
HOW TO CARE FOR YOUR BEBE CARE TRAVEL COT Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
Page 13
Maclaren, Munchkin, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing investment in product development.
Page 16
Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...
Need help?
Do you have a question about the 079101-158 and is the answer not in the manual?
Questions and answers