Advertisement
Quick Links
Fitting/replacing bulbs
• This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.
Microwave Movement Sensor
• This product is fitted with a microwave movement sensor. Please see the additional instruction leaflet for detailed
operating instructions. Please note that the sensor is already installed inside the product.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning.
www.saxbylighting.com
Instruction leaflet
Lucca MW Mini LED Bulkhead
77915
Iss.1 21082018
Saxby Lighting . BH23 3PE
Advertisement
Summary of Contents for Saxby Lucca MW Mini
- Page 1 Fitting/replacing bulbs Instruction leaflet • This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped. Lucca MW Mini LED Bulkhead Microwave Movement Sensor 77915 • This product is fitted with a microwave movement sensor. Please see the additional instruction leaflet for detailed operating instructions. Please note that the sensor is already installed inside the product. We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish. Recycling advice Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Safety information For your safety, always switch off the supply before cleaning.
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. Existing fittings must be completely removed before • Knock out the chosen fixing holes Warning installation of a new product. Before removing the existing • Fix into position. Take care to avoid damaging any fitting, carefully note the position of each set of wires. concealed wiring and pipes. The correct fixings should This product is Class 2 (Double insulated) This light fitting should be connected to a circuit with a • Gently pull the casing away from the shade and set be used for brick, cavity walls or plasterboard.