Advertisement
Interested in turning Spindles?
An accessory head is available to turn your
Bowl Steady Rest into a Spindle Steady
Rest!
This head uses a scissor-like action to
clamp around the spindle, and is very easy
to setup and use. Simply move the Post
forward, attach the head, and start turn-
ing.
Reducing the vibration along a spindle
means a nicer finish to the piece (i.e. less
time spent sanding) and a safer, more
pleasurable turning experience.
Manufacturers Warranty
Date Purchased:
Manufactured parts on this ONEWAY product are backed by a warranty period
of 5 years from the date of purchase.
The Wheels and Bearings are not covered under this Warranty.
ONEWAY hereby agrees to repair or replace, any defects due to faulty material or
workmanship, provided that:
1. The warranty period has not elapsed. Proof of purchase date (sales receipt
etc.) is required prior to any repair taking place.
2. The product has not been altered or modified in any way.
3. The product has not been subjected to misuse, abuse, negligence, or was
not used strictly in accordance with these instructions.
4. Transportation costs incurred in returning the product to ONEWAY
Manufacturing is pre-paid by the customer.
This warranty does not cover any costs or damages arising directly or indirectly
from the operation of this product.
No other guarantee, written or verbal, is authorized by ONEWAY
Manufacturing.
Our policy is one of continuous improvement. We therefore reserve the right to change the
specification and/or design without notice.
Spindle Steady Head Part No. 3308
Quality products, designed by Woodturners for Woodturners!
Contents Of Package
•
Tension Arm Assembly
•
Hardware Package
•
Clamp Block (lathe specific)
Note: Clamp Block may be packaged separately
241 Monteith Ave, Stratford, ON, N5A 2P6, Canada
Phone: 1-519-271-7611
Fax: 1-519-271-8892
E-Mail: postbox@oneway.ca
1 - 8 0 0 - 5 6 5 - 7 2 8 8
www.oneway.ca
Bowl Steady
Instructions
Part No. 3248
•
•
Wheels (2)
•
•
1¼" Post
•
•
Base
•
•
•
Advertisement
Table of Contents
Related Manuals for Oneway Bowl Steady
Summary of Contents for Oneway Bowl Steady
- Page 1 Manufactured parts on this ONEWAY product are backed by a warranty period of 5 years from the date of purchase. The Wheels and Bearings are not covered under this Warranty. ONEWAY hereby agrees to repair or replace, any defects due to faulty material or workmanship, provided that: Part No. 3248 1.
- Page 2 (Fig. 2, No. 3) which are included in the Hardware Package. Position the Bowl Steady to the front of the bowl. Next, bring the two wheels Note: Screw (Fig. 2, No. 3) should be snug, whereas, the Nut (Fig. 2, No. 4) up close and perpendicular to the rim of the bowl (or platter) you are turning.
Need help?
Do you have a question about the Bowl Steady and is the answer not in the manual?
Questions and answers