Download Print this page

EarthQuaker Devices Acapulco Gold Operation Manual

Hide thumbs Also See for Acapulco Gold:

Download this manual

Enlarged version

<<< Switching >>>

This device is true bypass and uses electronic relay-based switching. Audio will not pass

without power.

<<< Power Requirements >>>

• Current Draw: 18mA

• This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm

negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart

power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is

ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific

power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN

AT HIGHER VOLTAGES!

<<< Tech Specs >>>

• Input Impedance: 50K Ohm

<<< Warranty >>>

This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any

issues, please email info@earthquakerdevices.com.

www.earthquakerdevices.com

• Output Impedance: <10K Ohm

O P E R A T I O N M A N U A L

Page 1 This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any issues, please email info@earthquakerdevices.com. www.earthquakerdevices.com O P E R A T I O N M A N U A L ©2018 EarthQuaker Devices LLC...
Page 2 Since tone is in the hands, we decided to keep the controls of the Acapulco Gold as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume.