• If the power cord is damaged, it must be replaced by a Rowlett agent or a recommended qualified technician in order to avoid a hazard. • DO NOT use if damaged.
Page 3
- by clients in hotels, motels and other residential type environments; - bed and breakfast type environments. • Rowlett recommends that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
• Instruction manual Rowlett prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your Rowlett dealer immediately.
3. The slot selector knob is used to determine which slots are energised. Note: All Rowlett toasters (excluding 2-slot toasters) have a slot selector knob that enables you to control which slots are in use, saving on element wear and electricity.
Troubleshooting If your Rowlett appliance develops a fault, please check the following table before making a call to the Helpline. Fault Probable Cause Solution The unit is not working The unit is not switched on Check the unit is plugged in correctly and...
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Rowlett. Every effort is made to ensure all details are correct at the time of going to press, however, Rowlett reserves the right to change specifications without notice.
Page 8
Full Name • Volledige naam • Nom et prénom • Vollständiger Name • Ashley Hooper Nome completo • Nombre completo • Nome por extenso Technical & Quality Manager Position • Functie • Fonction • Position • Qualifica • Posición • Função Rowlett Toaster IM_UK_A5_v1_20190904.indb 8 2019/9/4 17:41...
Need help?
Do you have a question about the Premier and is the answer not in the manual?
Questions and answers