Advertisement
Table of Contents
- 1 Install the Flat Floor in the Middle of the Sauna
- 2 Position Assembly in Place and Secure to Sauna Walls and Floor
- 3 Ensure Bench Is Flush with Bench Support
- 4 Assemble Bench Support to the Short Front Lower Bench Wall
- 5 If the Porch Option Is Selected, Start by Installing Floor
- 6 Install Backrest with 2” Screws at Desired Height
- 7 Fasten Bench to Floor and Sauna Wall
- 8 Assemble the 2 Pieces for the Porch Seat Together
- Download this manual
Dundalk LeisureCraft Lounge Bench
Assembly Instructions
Install the flat floor in the middle of the sauna
making sure it is level.
Using the pre drilled holes, assemble the lounge
bench support to the longer front lower bench
wall using 2" screws.
Position assembly in place and secure to sauna
walls and floor using 2 ½" screws.
*Be careful not to screw into any stave joints.
Place lounge bench on top of bench support.
Advertisement
Table of Contents
Summary of Contents for Dundalk LeisureCraft Lounge Bench
- Page 1 2” screws. Position assembly in place and secure to sauna walls and floor using 2 ½” screws. *Be careful not to screw into any stave joints. Place lounge bench on top of bench support.
- Page 2 Dundalk LeisureCraft Lounge Bench Assembly Instructions Ensure bench is flush with bench support and secure with 2 ½” screws in pre drilled holes. * If sauna is purchased with wood burning heater, repeat process for opposite bench. * If electric heater is chosen, continue onto next step.
- Page 3 Fasten bench to floor and sauna wall using 2 ½” screws. Repeat process for other bench. Install backrest with 2” screws at desired height making sure that the lounge bench can still operate correctly. Repeat for other side. Congratulations on the assembly of your Dundalk Leisurecraft Lounge Bench!
Need help?
Do you have a question about the Lounge Bench and is the answer not in the manual?
Questions and answers