Subscribe to Our Youtube Channel
Related Manuals for Brecknell RD65
Summary of Contents for Brecknell RD65
- Page 1 RD65 User/Technical Manual Contents subject to change without notice Version 1.3 05/2016...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ....................1 General Information ........................... 1 Specifications ..............................1 Contents ................................1 Installation ......................2 Display Setup ......................4 3.1 Protocol Format Details ........................5 Connection and Wiring Details ..............9 ... -
Page 3: Introduction
-5° to 160°F (-20° to 70°C) Power Supply 11V-32V DC adaptor Waterproof IP65 Grade Contents RD65 remote display RS232 10m communication cable DC24V 2.5A UL adaptor 2A fuse Quick Guide & Technical Manual RD65 www.brecknellscales.com ... -
Page 4: Installation
1. Install the remote display through the hanging holes on wall with two M12 or 1/2” screws. (Hanging hole’s diameter is 13mm). Ensure secure mounting before proceeding. 2. Interface Light sensor Power Socket Communication Output Socket Config. Switch Compartment 2A Fuse RD65 www.brecknellscales.com . 2 . ... - Page 5 See “Display Setup section”. (defaulted setting: Baud rate 9600, data form 8N1, Protocol format 3.1.5, Communication port RS232) 4. Attach power and communication cables. DO NOT power on until after completing step 4. RD65 www.brecknellscales.com . 3 . ...
-
Page 6: Display Setup
Format: 3.1.4 avail.) 19200 Format: 3.1.5 Bluetoo 38400 Format: 3.1.6 Position4 th (if 57600 Format: 3.1.7 avail.) 115200 Format: 3.1.8 Format: 3.1.9 Format: 3.1.10 Format: 3.1.11 Format: 3.1.12 Format: 3.1.13 Format: 3.1.14 Default dip switch settings in Bold RD65 www.brecknellscales.com . 4 . ... -
Page 7: Protocol Format Details
3.1.3. Data Format Example: 123456lb, transmit data format of Weigh-Tronix WI125 models: <SP><G><SP><SP><1><2><3><4><5><6><SP><L><B><SP><CR><LF> Notes for symbols used in commands and response: <SP> Space <G/N> G = Gross, N = Net <LB/KG> LB or KG <CR> Carriage Return character <LF> Line Feed character RD65 www.brecknellscales.com . 5 . ... - Page 8 3.1.6. Data format example: -9999lb, transmit data format: WI127 transmit data <SP><G><SP><1><0><0><0><0><0><SP><lb><CR><LF> <SP><G><-><9><9><9><9><9><SP><l><b><CR><LF> <SP><G><-><9><9><9><9><SP><l><b><CR><LF> Notes for symbols used in commands and response: <SP> Space (20hex) <G/N> G = Gross, N = Net <LB/KG> LB=lb, KG=kg <CR> Carriage Return character (0dhex) <LF> Line Feed character (0ahex) RD65 www.brecknellscales.com . 6 . ...
- Page 9 Notes for symbols used in commands and response: <STX> Start of Text ( 02hex) <SP> Space (20hex) <L/K> L = lb，K = kg <G/N> G = Gross, N = Net <CR> Carriage Return character (0dhex) <LF> Line Feed character (0ahex) RD65 www.brecknellscales.com . 7 . ...
- Page 10 Protocol Format Details (continued) 3.1.11. Data format example: 233233lb, transmit data format of 205/210: RD65 transmit commands : <ENQ> (05hex, Request weight from the indicator BI-Directional) Indicator Response: <SP><SP><2><3><3><2><3><3><lb><G><SP><SP><CR> Notes for symbols used in commands and response: <SP> Space (20hex) <kg/lb>...
-
Page 11: Connection And Wiring Details
RS485 receive- Black 3 -------------------- RS485 transmit+ Yellow 4 -------------------- RS485 transmit- Green 5 -------------------- RD_AGND Blue 2. Symbols Defined: ：no communication Err01 ：incorrect format data received Err02 ：over range ¯¯¯¯¯ ：below range _____ RD65 www.brecknellscales.com . 9 . ... -
Page 12: Troubleshooting
Check cable connection cable communication) connected correctly Format switch is not set correctly Check the RD65 and Host Err02 Host is not set correctly (incorrect format protocols to make sure they Unknown host or data format used on...
Need help?
Do you have a question about the RD65 and is the answer not in the manual?
Questions and answers