Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers
Summary of Contents for HUFCOR 600 Series
Page 1
Owners Manual for your guidance. If any malfunction of these partitions occurs, please phone your local Hufcor Distributor for service. This must be done immediately since Hufcor cannot be responsible for damages which result from delays or failure to advise Hufcor or Hufcor's local Distributor.
Page 2
CAUTION - Only personnel who have been trained in accordance with these operating instructions should be permitted to operate the partition. CAUTION – Hufcor supplies a secondary switch in addition to the Touchscreen controller. In many locations, local building codes require the use of a secondary switch for movable wall operation. This means that two people are required to activate the partition.
Page 3
I N I T I A L S E T- U P This control device has been programmed for set-up with two levels of security, the Administrator (Admin) level and the User level. The Administrator has the ability to set and re-set passwords including the User(s) password.
Page 4
T O C LO S E PA RT I T I O N S Moving partition from stacked position to extended position. 1. Touch the screen to activate the touchscreen. 2. Touch the Password button and enter the password (Fig. 9). The factory default password is 2222.
Page 5
T O O P E N PA RT I T I O N S Move partition from extended position to stacked position. Touch the screen to activate the touchscreen. 1. CAUTION - If your partition has optional pass-through doors, make F i g .
Page 6
Hufcor order number and the date of installation. Also provided is the Hufcor phone number and the website you can visit to find F i g . 1 6 your local distributor information (Fig.
Need help?
Do you have a question about the 600 Series and is the answer not in the manual?
Questions and answers