Table of Contents
Advertisement
Quick Links
IMPORTANT
The Interceptor HEPA filter is de-
signed to work with the HP60 or HP-
PLUS to process air that is going into
or coming out from beneath cabinets,
walls, ceilings and floors.
It is important to know that HEPA fil-
ters do not make a HEPA system.
Only by processing all air negatively,
can a HEPA system be achieved. All
air is processed before going through
the blower in either negative or posi-
tive drying modes thus never con-
taminating equipment.
IMPORTANT
Phone: 425-822-3851 Fax: 425-745-8480 Toll Free: 800-257-0797
Read these instructions before use. Save instructions & packaging.
Safety warnings are located on page 2
www.injectidry.com
OPERATION GUIDE
INTERCEPTOR HEPA FILTER
For use with the HP60 & HP-PLUS
Using the Interceptor HEPA filter
will help prevent particulate
damage to your machine and
prevents cross contamination of
mold, pet dander and other al-
lergens.
Particulate damage is not cov-
ered by your HP warranty
Revised 4/15
Advertisement
Table of Contents
Summary of Contents for Injectidry Systems INTERCEPTOR HEPA
-
Page 1: Introduction
For use with the HP60 & HP-PLUS IMPORTANT Read these instructions before use. Save instructions & packaging. The Interceptor HEPA filter is de- signed to work with the HP60 or HP- PLUS to process air that is going into or coming out from beneath cabinets, walls, ceilings and floors. -
Page 2: Table Of Contents
We recommend vacuuming out the pre-filter after every job and replace as needed. TABLE OF CONTENTS INTRODUCTION…………………………………………………………………………………………………… 1 SAFETY WARNINGS……………………………………………………………………………………………… 2 PACKING LIST……………………………………………………………………………………………………… 3 REPLACEMENT FILTER INFO……………………………………………………………………………….. 3 INTERCEPTOR HEPA FILTER SET UP INSTRUCTIONS………………………………………… 4-5 INTERCEPTOR WITH WATER SEPARATOR………………………………………………………….. 6 FREQUENTLY ASKED QUESTIONS………………………………………………………………………. 6 WARRANTY ……………………………………………………………………..…………………………………… 7 CUSTOMER SERVICE ………………………………………………………………………………………..… 7 800.257.0797... -
Page 3: Packing List
PACKING LIST DESCRIPTION PART # Interceptor roto-molded enclosure Interceptor Main AIR IN hose Interceptor Main AIR OUT hose HEPA Filter INFR1 Pre–Filter (green and yellow) PF10 REPLACEMENT FILTER INFO The HEPA filter replacement part number is INFR1. Each INFR1 comes with one pre-filter (green and yellow). Purchase a 10 pak of pre-filters to extend the life of your HEPA filter (part number PF10. -
Page 4: Interceptor Hepa Filter Set Up Instructions
INTERCEPTOR HEPA FILTER - SET UP INSTRUCTIONS STEP 1: Install the Interceptor Air IN Main hose onto the Interceptor HEPA filter. Each hose is labeled with an AIR IN and AIR OUT label. This can get a little confusing, so we recommend fol- lowing these steps to ensure it is placed in the right order. - Page 5 United States patents and is therefore strongly discouraged. The user is advised to seek legal counsel before use of that combination of equipment. Injectidry Systems, Inc., Seller, does not assume and hereby disclaims liability for patent infringement claims arising from such use. Buyer agrees not to use Seller's equipment, training, literature or advice for the purpose of using heat or inducing others to use heat to destroy organisms, remove toxins from a structure, remediate mold, or kill insects, bacteria, viruses, dust mites, spiders or fungi.
-
Page 6: Interceptor With Water Separator
INTERCEPTOR HEPA FILTER WITH WATER SEPARATOR STEP 1: If using the Water Separator, before you connect the Interceptor Main Air IN hose to the Interceptor, thread the 2” female fitting (on the end of the Interceptor AIR IN hose) onto the 2”... -
Page 7: Warranty
Freight Damage Injectidry Systems is not responsible for freight damage. We will assist you in filing a freight claim. The shipper must be notified within 48 hours or by the next business day.
Need help?
Do you have a question about the INTERCEPTOR HEPA and is the answer not in the manual?
Questions and answers