Table of Contents
Advertisement
Motherboard Manual
4.3 AMI BIOS Beep Code
Boot Block Beep Codes
Number of Beeps
Continuing
POST BIOS Beep Codes
Number of Beeps
1
8
4.4 Troubleshooting
Probable
1. There is no power in the system.
Power LED does not shine; the fan
of the power supply does not work
2. Indicator light on keyboard does
not shine.
System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.
System does not boot from a hard disk
drive, but can be booted from optical
drive.
System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.
Screen message shows "Invalid
Configuration" or "CMOS Failure."
System cannot boot after user installs a
second hard drive.
24
Description
Memory sizing error or Memory module not found
Description
Success booting.
Display memory error (system video adapter)
1.
Make sure power cable is securely
plugged in.
2.
Replace cable.
3.
Contact technical support.
Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.
1.
Check cable running from disk to disk
controller board. Make sure both ends
are securely plugged in; check the
drive type in the standard CMOS
setup.
2.
Backing up the hard drive is extremely
important. All hard disks are capable of
breaking down at any time.
1.
Back up data and applications files.
2.
Reformat the hard drive. Re-install
applications and data using backup
disks.
Review system's equipment. Make sure
correct information is in setup.
1.
Set master/slave jumpers correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.
Solution
Hide quick links:
Advertisement
Table of Contents
