Garden Treasures 13-MZ12255GA Manual page 5

ASSEMBLY INSTRUCTIONS
4. Connect pump (G) to the water hose which comes out
from the bottom of the middle connector (D).
5. Place the pump (G) in the center of fountain reservoir (E).
Secure the assembly from step 1 to the fountain reservoir
(E). The triangle marks on the pieces should align after
assembled.
6. Pour water gently into the fountain reservoir (E), making
sure pump (G) is fully submerged. Plug the pump (G) into
a power supply. To adjust the strength of the water flow,
use the small lever on the pump (G). Moving the level
toward the "+" will increase the strength and moving it
toward the "-" will decrease the strength. (Tip: The water
flow for this fountain is tested on level ground. To get a
better water flow effect, it is necessary to place the
fountain on level ground. It will accomplish the same water
flow effect to insert a mat under the fountain).
WARNING: Always disconnect the pump (G) before
placing your hands in the water.
4
5
6
5