SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the
product.
INSTALLATION
This reel is designed for installation near a water source. The 6 feet inlet hose allows you to install the reel
to the most suitable surface (wall, post, or even a beam or rafter).
1.
Attach the inlet hose to the reel by turning the brass thread onto the brass inlet shaft; connect the
opposing end to the water source outlet. If necessary, apply Teflon tape to prevent leakage. Ensure the
fittings are securely tightened.
2.
Using the mounting bracket as a guide, mark the screw positions, and install the mounting bracket in a
position that will provide the most suitable work access.
WARNING
The mounting bracket must be installed using the 4 M8 screws provided. Use lock washers to
ensure the bracket remains secure.
3.
Attach the hose reel to the mounting bracket using the pull-pin, and secure for safety.
COMPONENTS AND SPECIFICATIONS
2
4
1. Self-Laying System
2. Metal Handle
3. Fitting Rest
4. Metal Mounting Bracket
5. Multi-Position Lock
6. Low Speed Retraction System
5
HOSE LENGTH
HOSE LEAD LENGTH
MAX. WORKING PRESSURE
REEL MATERIAL
HOSE MATERIAL
FITTING MATERIAL
HOSE DIAMETER
FITTING
65'
6'
100 PSI
Polypropylene
Hybrid PVC
Solid Brass
1/2"
3/4" (F) GHT