Table of Contents
Advertisement
AUTOMATIC STOP SYSTEM
7.3.
7.3.1.
Automatic Stop system stops the machine during the bypass phase.
7.3.2.
To start the machine it is necessary to set the switch, fig.2.2 to the on (I) 'ON' position. After that press the trigger. The Automatic Stop
System will start the machine and will stop it automatically when the trigger is released. It is advisable to put on the trigger lock on the
pistol trigger whenever the machine is stopped, in order to prevent unintentional starting.
fig. C
7.4.
DETERGENT SUCTION
Refer to fig. D
fig. D
7.5.
HIGH PRESSURE LANCE
7.5.1.
Fan spray adjustment, see fig. E
fig. E
HIGH PRESSURE HOSE
7.6.
Refer to fig. F
7.7.
WATER SUPPLY
7.7.1.
Connect a supply hose (not included) to the water inlet of the unit and to the water supply. Turn the water supply on.
© Jack Sealey Limited
Original Language Version
fig. F
PW2000HW | Issue:1
25/07/18
Advertisement
Table of Contents
