Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio PDU-10 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products.
Page 3
DAP Audio DAP Audio PDU-10 Product Guide Warning.................…...……………..…………..………………….………..… Unpacking Instructions………………………………………………………………………………………………...….. Safety-instructions………………………………………………………………………………………………….……..… Operating Determinations.……………………………………………………………………………………….……..Return Procedure..............................Claims..................................Description..…................……….…………………………………...... Features………………………………………………………………………………….………………….…..... Overview Front..…………………………………………………………………………………..…....... Overview Rear...…………………………………………………………………………………….…...... Installation..............……………………………..…………………………..... Set Up and Operation..............……..…………………………….…....... Changing the fluorescent bulb.…………………………………………………………………..….……....Maintenance………......…........………..………….…….……………...... Troubleshooting………......…........………..………….…….………….……....Product Specifications..............……………….…….……………………....
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • DAP PDU-10 • 1x IEC powercable 1,40m • 8x IEC extension cable 1,80m •...
Page 5
Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Only use system indoor, avoid contact with water or other liquids. ...
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
8) Ampere meter Alows you to monitor the total current draw. 9) Unswitched power output This outlet is always active whenever the PDU-10 is plugged in, regardless of the status of the output (4) switch. 10) Fuse 10A Resettable Circuit Breaker. This circuit breaker will trip when the total current draw from all outlets...
Page 8
Rear Fig. 2 11) Lamp switch Enables you to switch the the power (5Vdc) for the minilight XLR output (12) on or off. 12) XLR output for mini-light Use this output to connect the included LED snakelight. 13) Power input 230V/50Hz 14) Starter for fluorescent tube When replacing, make sure you use a S2 starter type.
Changing the fluorescent Bulb The 4 watt fluorescent bulb in your PDU-10 is rated to deliver approximately 3000 hours of operation, so eventually you will have to replace it. The fluorescent bulb is ready available in most hardware stores and electrical supply houses.
Maintenance The PDU-10 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.