Advertisement
Quick Links
Advertisement
Summary of Contents for HG7AN Antenna Analyzer plus
- Page 1 User manual / verzió 1.0 / Budapest, 2017...
- Page 2 "Antenna Analyzer plus" is a multifunctional measuring instrument, most useful for amateur radio activity. Its size allows you to easily take it for relocation as well. The panel size is 115 x 75 mm fitting into a small box of size eg.
-
Page 3: Technical Data
TECHNICAL DATA: Version 1. Synthesizer: DDS with 1Hz resolution Power: 3.7V/1500mA Li-Ion Battery Frequency range: 100KHz - 200MHz Operation time: ~4.5 hours 0° – 360° Phase: Charge: 5V/400mA Measured result range: Charge time: ~4 hours 1Ω – 1000Ω Complex impedance: Interface: 802.11g Wi-Fi certified transceiver... - Page 4 Warnings: - Be sure that your antenna has no stored electrostatic charge before trying to connect to the antenna analyzer. - Do not connect the antenna analyzer to antenna in a stormy weather. - Do not left the antenna analyzer connected to antenna. Electrostatic discharge can damage analyzer even if it powered off.
- Page 5 FUNCTIONS Antenna analyzer: A: Choose a band or type the center frequency in the input field B: Set the scan bandwidth C: Choose the function of the frequency-tuning knob and the step value D: Frequency-tuning knob. You can use the frequency-tuning knob to set the center frequency or scan bandwidth E: Select the measured value that the „blue”...
-
Page 6: Smith Chart
Smith Chart: A: Read the result from the the graph B: Analysis results: minimum SWR value in the measured frequency range complex impedance value at the minimum SWR value start frequency of the bandwidth end frequency of the bandwidth bandwidth of the measured antenna quality of the measured antenna C: Press the Freq Graph button to return to the frequency graph... - Page 7 SIMPLE (measurement on a single frequency): A: Choose a band or type the frequency in the input field B: Choose the step value of the frequency-tuning knob C: Frequency-tuning knob. You can use the frequency-tuning knob to set the frequency D: Press the Start button and wait for the result of the measurement E: Read the result F: Display of the battery value...
- Page 8 L/C (LC meter): A: Follow the instructions and press the Start button B: Read the result C: Display of the battery value D: Press the Back button to return to the main page Tips and tricks: For more accurate measuring of a capacitance or inductance, make a very short measuring cable and calibrate the analyzer with OSL method at the end of the measuring cable.
- Page 9 SPECT (Spectrum display): A: Choose a band or type the center frequency in the input field B: Set the scan bandwidth C: Choose the function of the frequency-tuning knob and the step value D: Frequency-tuning knob. You can use the frequency-tuning knob to set the center frequency or scan bandwidth E: Press the Start button and wait for the result of the measurement F: Read the result from the the graph...
- Page 10 SIGNAL (Signal generator): A: To switch on or off the Channel 1 output press the eligible button B: To switch on or off the Channel 2 output press the eligible button C: Set the phase value between the channels D: Type the Channel 1 frequency in the input field E: Type the Channel 2 frequency in the input field F: Offset function selection buttons for Channel 1 G: Offset function selection buttons for Channel 2...
- Page 11 I: Press the Save button to store the new WIFI-SSID and/or password J: Press the Back button to return to the main page I'm happy to provide you with further information, please contact me at: hg7an.zoli@gmail.com WWW.HG7AN.COM...
Need help?
Do you have a question about the Antenna Analyzer plus and is the answer not in the manual?
Questions and answers