Remote Shutter Control; Location; Battery Replacement; Supported Phones - Funnelback iTAG User Manual

Remote Shutter Control

Go back to the home screen.
1. Press the "Camera" button in the top left corner to access the camera.
2. You can adjust camera settings from here.
3. Press the button on iTag once, it works as a remote shutter to take photos.

Location

Location list: You can mark the location of your iTag on the map by pressing the button on iTag. The
message "Location Success" will pop up. You will find the marked location in the location list.
Lost history: If the iTag is lost, a pin-drop will be marked automatically on the map to tell you where it was
last located. Go to "lost history" to find the record.

Battery replacement

The battery is in the back of the tag. Use a coin as a key and twist it to right to open the battery cover, then
replace the battery. A replacement for the CR2032 cell is easy to get. After replacement put the cover back
and close it to the left with the coin.

Supported phones

iOS: Bluetooth 4.0, iOS 7.0 and above. iPhone $S and above, iPad, iPad mini, iPad touch.
Android: Bluetooth 4.0, Android 4.3 and above. Samsung S4,S5, Xiaomi 2/3/4 and other Android phones.