Advertisement
1. Remove the battery cover and make sure the battery
is placed in the right way with positive to positive and
negative to negative.
(NOTE: If the battery is not fit and is shaking around,
grab a ball point pen and gently bend the pins in
slightly so it holds the battery comfortably. See image
below)
2. Turn on the device with the switch on the front. A test
spray will occur so make sure you aim the spray away
from your face and body
3. Fill the collar with the citronella can provided inside
the box by inverting the can and placing the nozzle on
the valve. Push down and hold for 10-15 seconds to
fill.
Advertisement
Table of Contents
Summary of Contents for BarkTec BT-100
- Page 1 1. Remove the battery cover and make sure the battery is placed in the right way with positive to positive and negative to negative. (NOTE: If the battery is not fit and is shaking around, grab a ball point pen and gently bend the pins in slightly so it holds the battery comfortably.
- Page 2 4. Attach the collar strap to the collar by wrapping the collar strap around the front of the collar. Ensure the spray and valve are facing upwards. 5. Place collar on dog and secure tightly around the neck. (Tight enough where it won’t fall off the dog and tight enough so the microphone can hear the dog barking noise)
Need help?
Do you have a question about the BT-100 and is the answer not in the manual?
Questions and answers