Subscribe to Our Youtube Channel
Summary of Contents for MediaSonic HT31-304
- Page 1 FITS 4 X 3.5" SATA/SAS HDD MOBILE RACK For 3 x 5.25" device bays of PC HT31-304 USER’ S MANUAL Official website Online forum www.mediasonicusa.com http://forum.mediasonic.ca/...
- Page 2 Thank you for purchasing Our product. please read the user manual carefully before using this product. 1. When installing new HDD or SSD drives, the drives need to be initialized and formatted. 2. Do not disassemble, repair and modify this product. 3.
- Page 3 HT31-304 SATA /SAS HDD mobile rack is constructed to fit 4 drives within 3 x 5.25” drive bays. It supports 2.5” or 3.5” HDDs or SSDs up to SATA III transmission speed 6Gbps. Durable metal housing expands the lifespan, it’s simple for drive installation and maintenance.
- Page 4 Panel Description HDD Failure LED Mute button Power LED Fan Failure LED Over Temperature LED HDD Activity LED Security lock Safety lock status Safety locks switch descriptions status Description Locked state Unlocked state Close state Open state HDD1 HDD2 Raid Controller HDD3 HDD4 HDD Failure LED Input...
- Page 5 Product Installation 1. Please take out the product and related accessories. 2. Install the product in the 5.25” device bay of PC and fixed with screws. 3. Connect the SATA cable and power cable to the mobile rack. SATA 1 SATA 2 SATA 3 SATA 4...
- Page 6 HDD Installation 1. Use the included key to rotated the security lock to the unlocked state. 2. Slide safety lock to the open state to open the front panel. 3. Slide out hard drive tray.
- Page 7 4. Install hard disk on the tray and secure it with screws. 2.5”HDD fixed holes 3.5”HDD fixed holes 5. Slide the installed HDD tray in to the rack and close the front panel. Slide safety lock to close state 6.Use the key to lock the panel and turn to the locked state.
Need help?
Do you have a question about the HT31-304 and is the answer not in the manual?
Questions and answers