Advertisement
Problem
Unit won't work and is
plugged in.
Unit will sift, but not
pulse.
Unit comes on, but will
not sift or pulse.
Unit works, but shuts off
before timer hits zero.
Unit works, but no light
comes on.
Unit runs but lacks
power.
Troubleshooting
Possible Cause
Check plug input to unit,
then check fuse.
Pulse timer inoperative.
Call for technical support.
Make sure stack assembly
is inserted correctly. If
the stack assembly is not
the problem, the cam
assembly may be out of
alignment or the trigger
spring may be broken.
Stack assembly has not
been unlatched.
Replace the starter, which
is located in the upper left
hand corner of the
chamber. Also check the
light bulb.
Possible defective driver
or defective power
transformer
Advertisement
