Table of Contents
Advertisement
Quick Links
0/\YST /\ia FILTEiaS
MAG"'-IESIUM QUARK
Congratulations on your purchase of a Quark Magnesium
"Eyepiece"
solar
filter.
Please read this manual before using the product.
To use the filter, plug in the included power
supply,
then place the
Quark after your telescope's diagonal and insert an eyepiece or
camera in the rear of the filter. Turn the knob to point straight away
from the LED light.
When the light turns green in about 5-10
minutes your viewing experience can begin.
To prevent damage, we recommend using an Energy Rejection Filter on
telescopes of 80mm aperture or
more,
or when tracking the Sun for long
periods. This can be a UV/IR cut filter mounted before the diagonal, or a
full aperture red or yellow glass ERF mounted in front of the telescope
.
Daystar Quark Configuration on Refractor
with Rear Mount UVfIR Cut ERF
- Eyepiece
(25-40mm Plossl)
- D/WSTI\a
QUARK
- Diagonal
Warnings:
Do not disassemble the filter, the blocking element is separated from the
etalon and the complete assembly must be used together for safe
viewing
.
Do not power the filter from a computer or cell phone charger as the
Quark requires a high current power supply (> 1.5A) for operation
.
For
assistance:
Call:
1 (866) 680-6563
Email
:
service@daystarfilters .com
Visit:
http://www.daystarfilters.com
Advertisement
Table of Contents
