They are designed to break earthmover tire beads on any rim. jury, always wear proper pro- They can be used with all models of AME air hydraulic pump (15000, tective gear, such as hard 15020, 15040, 15900, 15920, 15940) or equivalent 10,000 psi [700 bar] hats, safety glasses, gloves, pumps.
“Positioning the Bead Breaker.” trol of the bead breaker. If it is not seated properly and flies off the rim, the bead breaker could cause serious injury or death. - 3 - AME ITERNATIONAL WWW.AMEINTL.NET...
Page 4
1. Turn on the hydraulic pump to activate the bead breaker. injury or death. 2. Apply enough hydraulic pressure to the bead breaker to push the flange about ½-3/4 inch [13-19 mm] from the lip of the bead seat band. - 4 - AME ITERNATIONAL WWW.AMEINTL.NET...
Page 5
NOTE: If you have gone all the way around the tire and the tire bead does not break: Repeat the steps in “Activating the Bead Breaker” and “Continuing to Break the Tire Bead” above, with more hydraulic pressure. - 5 - AME ITERNATIONAL WWW.AMEINTL.NET...
Page 6
If the wheel is on the vehicle, you may need to use a smaller ram, such allows you to maintain con- as an AME Intl. 13060, between the frame of the vehicle and the back trol of the bead breaker. If it flange ( See Figure 8) Repeat the steps in “USING THE 11005 BEAD...
Page 7
Be careful to keep paint out of the lock ring groove in the gutter when repainting rim parts. 4. Visually inspect all tire and rim parts to make sure they are positioned prop- erly. - 7 - AME ITERNATIONAL WWW.AMEINTL.NET...
Page 8
Coupler injury or death. 11050-010 *G836028 Screw Item #1, base, is not a servicable item. Order AME Intl replacement cylinder 13010 * Indicates items included in, and available only as part Repair Kit 11050-RK - 7 - AME ITERNATIONAL WWW.AMEINTL.NET...
Page 9
INSTRUCTION MANUAL Parts List For OTR Giant Tire Bead Breaker Model 11050 ! WARNING ! Item Part Stock Description To avoid serious personal in- 11050-011 L202110 Spring jury, always wear proper pro- 11050-012 DA2286028 Screw tective gear, such as hard...
Need help?
Do you have a question about the 11050 and is the answer not in the manual?
Questions and answers