Page 2
Prior to the first use of this product, please read this guide carefully and follow the instructions. Specifications Folded Size: 70 x 40 x 23 cm (27.5” x 15.75” x 9”) Unfolded size: 178 x 85 x 70 cm (70” x 33.5” x 27.5”) Weight: 10 KG (22 lbs) Weight Capacity:...
Page 3
Operation: 1) When unfolding the lift unfold the support frame first so the lift is supported on the ground on the wheels and casters. Notes: A. The ground should be flat and level where the lift is used. B. Both sides fo the support frame should be even and correctly unfolded to prevent imbalance of the lift.
Page 4
Note: When pulling out each circular tube ensure they are fully extended and the edge of the push button overlaps slightly. If the sections aren’t locked in position the lift may fail or be damaged. 3) Ensure the maximum weight lifted does not exceed the maximum of 30 KGs (66 lbs).
Page 5
4) Lifting strap must be wound around the cylinder a minum of 3 times to prevent accidents or damage. 5) Electrical Connection: Insert one end of the power cable into the socket of the lift and the other end into the scooter/wheelchair charged socket.
Page 6
7) Height Adjustment: Adjust the height by pulling the circular telescopic tube sections out to their locking position. Only pull out as many sections as needed to lift your wheelchair into your vehicle. 8) Push the locking buttons inward to unlock the sections and collapse them one at a time until all sections are collapsed.
Page 7
Contact your dealer for advice or assistance. Warranty: EZee Life™ products carry a one-year warranty against manufacturing defects, faulty materials and workmanship. In the event of a defect covered by this warranty, we will, at our option, repair or replace the item.
Need help?
Do you have a question about the CH5060 and is the answer not in the manual?
Questions and answers