Advertisement
Quick Links
How to remove your S2U Computer
Tools Required
Metric Allen Set
#1Phillips Extended Screwdriver
#2 Phillips Screwdriver
Cutters
Vacuum Cleaner
Make sure the bike is unplugged from the wall outlet.
1)
Remove the hardware
holding the conduit tube at the top of the computer and the bolts that hold
the computer to the frame of the bike. There are four and they will have red
TAKE CARE WHEN REMOVING THESE BOLTS. DO NOT STRIP
262 loctite.
OUT.
(FIG 1)
P.O. Box 845, Alpharetta, GA 30009 5936-A Peachtree Rd, Atlanta, GA 30341
Phone 770-807-1482 Fax 770-455-0128
Advertisement
Related Manuals for Champion S2U
Summary of Contents for Champion S2U
- Page 1 How to remove your S2U Computer Tools Required Metric Allen Set #1Phillips Extended Screwdriver #2 Phillips Screwdriver Cutters Vacuum Cleaner Make sure the bike is unplugged from the wall outlet. Remove the hardware holding the conduit tube at the top of the computer and the bolts that hold the computer to the frame of the bike.
- Page 2 WITH EXTREME CAUTION , gently and carefully slide the computer forward away from the bike. You may need to lift up slightly on the bike to clear the conduit tube. (Fig 2) 3) Use the #1 Phillips to remove the tiny hidden screws around the perimeter of the housing.
- Page 3 4) The two halves of the case can now be separated. Use the vacuum to remove any dust bunnies you find. (Fig 4) 5) In the next step you will disconnect the cables that connect the computer to the WE STRONGLY RECOMMEND TAKING PHOTOS AT THIS STEP BEFORE bike.