Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RedSeven Amplification Kali’ Mk 2
Summary of Contents for RedSeven Amplification Kali’ Mk 2
- Page 1 Kali’ Mk 2 model: K30 User Manual...
-
Page 2: Table Of Contents
INDIEX INTRODUCTION pg 1 POWER SUPPLY pg 3 TECHNICAL FEATURES pg 5 FIRST USAGE pg 9 TUBE LAYOUT pg 10 TROUBLESHOTTING pg 11 WARRANTY pg 12... -
Page 3: Introduction
INTRODUCTION Kalì Mk II is a vintage inspired single channel tube based guitar amplifier. Though as an ideal platform for you pedals. Noted for its huge dynamic range and sonic purity. Now it comes with a brand new incarnation of our Aureal Verb pedal inside, a digital based spring emulation reverb, with mix and time controls. - Page 4 NOTE: IMPORTANT…NOT TO DO! • Do not try to change output jacks (impedance) while the amplifier is on. You must turn STANDBY and POWER switches to OFF position before changing the output impedance. • Do not try to change input/output levels of you devices plugged into fx loop while the amplifier is on.
- Page 5 PREMISE By developing this amplifier we had few main visions in our minds: 1 – THE AMPLIFIER MUST SOUND GOOD IN A MUSICAL CONTEST AND NOT IN YOUR BEEDROOM EXCLUSIVELY. This can be hard to understand to some people, but every step of our develop process we recorded it through a professional studio recording system, ensuring useless frequencies which can fight with bass guitar, or synths or maybe cymbals in a live/recording environment.
- Page 6 SOUND DESCRIPTION Kalì Mk II is the first ever amplifier form RedSeven Amplification. This is our take on the vintage 2x12 british combo amplifier of the mid ‘60s. Beside this design many “boutique” guys spent a lot of their time developing their own version, including mr.
-
Page 7: Technical Features
TECHNICAL FEATURES FRONT PANEL: (from left to right) • STANDBY / ON SWITCH: turn the amplifier in standby mode or in operative mode. • BLUE INDICATOR: (near STANDBY / ON SWITCH): this light indicate the state of incoming power supply. It will turn on if everything is ok. POTS: •... - Page 8 REAR PANEL (from left to right) • LINE OUT: jack and level pot for line out signal, taken from the output jacks. Please remember you MUST use a cabinet anytime in conjunction with this output. Using Line Out by itself without any load will damage this amplifier. •...
-
Page 9: First Usage
FIRST USAGE Before plug the power cord make sure to check the input voltage of the amplifier and be sure to match it with your wall voltage, and then insert the power chord. Before plug the speaker cable, check the impedance of your cab and match the output impedance of amplifier, than connect the speaker cable from cabinet to amplifier. -
Page 10: Tube Layout
TUBE LAYOUT This amplifier comes with EL84 type tubes in the power amp section and 12AX7 in preamp, selected trusty partners Tube Doctor. Power tube can’t be changed with other type of tubes (i.e 6L6s, El34s, etc), they can be substitute only with other EL84 type tubes. -
Page 11: Troubleshotting
CABINET AND SPEAKERS For the best sonic experience ever we highly suggest to play this amplifier with RedSeven Pro Cab series. We develop this amplifier thru this cabinet so this is the natural extension for it. We suggest you to try K30 with Celestion Blue Alnico, Gold Alnico, Greenback and WGS Retro30. -
Page 12: Warranty
By removing the amplifier form his wood cabinet or by making any modification to the original state will violate standard warranty and RedSeven Amplification will not responsible for any damage to people, things or animals. Revision 1.0 September 2018...
Need help?
Do you have a question about the Kali’ Mk 2 and is the answer not in the manual?
Questions and answers