Table of Contents
Related Manuals for RoadHog CP12LF
Summary of Contents for RoadHog CP12LF
- Page 1 CP12LF CP16LF MANUAL Operation Maintenance Service Parts Warranty Serial number ___________________________ Date released for shipment _________________ PUBLICATION DATE: 03/25/11 RoadHog, Inc. 877-640-9975 www.roadhog-inc.com...
- Page 2 INTRODUCTION Thank you for your investment in Roadhog Inc. We are confident that you will find that your Roadhog Inc is the easiest to operate, safest, most durable, and most efficient attachment on the market. Your Roadhog Inc is equipped with high performance, heavy duty components. To en- sure that these components operate properly and effectively, this manual must be fol- lowed.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Page SAFETY DECALS …………………………………………………………………………….4 SAFETY PRECATUTIONS …………………………………………………………………..5 MANDATORY SAFETY SHUTDOWN PROCEUDRE ……………………………………5 SAFETY ………………………………………………………………………………………..6 SETUP ………………………………………………………………………………………….7 OPERATION …………………………………………………………………………………..8 MAINTENANCE..…... ………………………………………………...…………………...9 SERVICE..…………………………………………………………………………………10-11 CHASSIS GROUP PARTS DRAWING……….………………………...…………..12-13 ATTACH GROUP PARTS DRAWING……….………………………...….………..14-15 DRIVETRAIN AND DRUM PARTS DRAWING….…………..…………………..16-17 HYDRAULIC GROUP PARTS DRAWING...………………...…………....18-19 DECAL GROUP PARTS DRAWING……….…………………………...…...……..20-21 HYDRAULIC SCHEMATIC……………………………...….…………………..…….. -
Page 4: Safety Decals
SAFETY DECALS The safety decals existing on the attachment should be clearly read- The FLYING OBJECTS decal able and always followed. The lo- warns the operator the operator cation and description of the de- and bystanders to stay away dur- cals is shown in the parts diagram. -
Page 5: Safety Precatutions
Roadhog Inc makes operator safety a priority when designing machinery. Ex- posed moving parts are guarded when- ever possible for safety. However, not all moving parts can be shielded in or- WARNING der to ensure proper operation. - Page 6 SAFETY 5. BE SURE to raise the attachment totally off the ground BEFORE side- shifting. A careful operator is the best protection 6. CAREFULLY inspect ALL hydraulic against accidents. Most accidents involv- hoses and connections on a routine ing operators of industrial equipment are basis;...
-
Page 7: Setup
2 required hydraulic quick couplers. Obtain correct brand and size and install them on the hoses. The CP12LF and CP16LF are Low Flow Cold Planers which operates on the aux- iliary flow of the skid loader. Since the auxiliary flow is reversible, be sure to op- erate the unit so the drum is spinning in the correct direction. -
Page 8: Operation
OPERATION In attaching the unit to the skid steer, ensure that all hydraulic hoses are coupled securely to the quick couplers. Two hoses The cold planer is a hydraulically are to be connected, pressure & return. powered attachment intended for cutting asphalt concrete surfaces. -
Page 9: Maintenance
MAINTENANCE WARNING NEVER DRIVE THE PICK BY STRIK- Proper maintenance of the attachment ING DIRECTLY ON THE END OF THE will result in longer life and the more PICK AS THIS CAN CAUSE THE PICK productive and cost effective operation. TO CHIP AND CAUSE INJURY OR There are two basic categories of... -
Page 10: Service
SERVICE WARNING EXERCISE EXTREME CAUTION WARNING DURING THIS OPERTION PREVENT TIPPING OF THE UNIT. BEFORE SERVICING THIS UNIT, THE MANDATORY SAFETY SHUTDOWN Drum Removal PROCEDURE MUST BE COMPLETED. 1. Perform mandatory shutdown pro- SEE “SAFETY” SECTION. cedure with the cold planer adjusted to the maximum depth. - Page 11 Drive Motor Removal 1. Remove the drum from the planer chassis. 5. Lift cold planer chassis off of drum using a hoist. 2. Remove (4) deadshaft nuts from the 6. Reverse steps for reassembly. right side of the drum and remove the dead shaft.
- Page 12 CHASSIS GROUP (CHASSIS PARTS) CP12LF and CP16LF Cold Planer...
- Page 13 CHASSIS GROUP (CHASSIS PARTS) CP12LF and CP16LF Cold Planer CP12LF CP16LF ITEM QTY PART NO. PART NO. DESCRIPTION 106-0504 106-0504 WHEEL WELDMENT 106-0585 106-0585 BEARING, DU 1.25 PIN X 1.25 WIDTH 106-0750 106-1628 CHASSIS WELDMENT 106-0765 106-1633 CHASSIS SHROUD WELDMENT...
- Page 14 CHASSIS GROUP (DEPTH SKID PARTS) CP12LF and CP16LF Cold Planer...
- Page 15 CHASSIS GROUP (DEPTH SKID PARTS) CP12LF and CP16LF Cold Planer CP12LF CP16LF ITEM QTY PART NO. PART NO. DESCRIPTION 106-0500 106-0500 PIN WELDMENT 106-0504 106-0504 WHEEL WELDMENT 106-0534 106-0534 PLATE, PIVOT SPACER 106-0535 106-0535 PLATE, PIVOT RETAINER 106-0585 106-0585 BEARING, DU 1.25 PIN X 1.25 WIDTH...
- Page 16 ATTACH GROUP CP12LF and CP16LF Cold Planer...
- Page 17 ATTACH GROUP CP12LF and CP16LF Cold Planer CP12LF CP16LF ITEM QTY PART NO. PART NO. DESCRIPTION 106-0522 106-0522 WELDMENT, ATTACH 106-0532 106-0532 PLATE, SIDESHIFT SPACER 106-0533 106-0533 PLATE, SIDESHIFT RETAINER 106-0589 106-0589 PLATE, SIDESHIFT SPACER (PLASTIC) 106-0657 106-0657 CYLINDER, SIDESHIFT...
- Page 18 DRIVETRAIN and DRUM GROUP CP12LF and CP16LF Cold Planer ITEM...
- Page 19 DRIVETRAIN and DRUM GROUP CP12LF and CP16LF Cold Planer ITEM QTY PART NO. DESCRIPTION 106-0669 BOLT, 5/8-11 X 2.25 RND HD, RBD NECK 106-0794 MOTOR, EATON 4K #110-1087 106-0795 ASSEMBLY, DRUM WITH PICKS & STUDS 106-0799 WELDMENT, MOTOR HUB 106-0800...
- Page 20 HYDRAULIC GROUP CP12LF and CP16LF COLD PLANER...
- Page 21 HYDRAULIC GROUP CP12LF and CP16LF Cold Planer ITEM QTY PART NO. DESCRIPTION 106-0575 ASSEMBLY, CHECK VALVE 106-0828 ASSEMBLY, DIVERTER VALVE 106-1247 PLATE, VALVE MOUNT HB025L0200A BOLT, 1/4-20 x 2.00 PLATED HB038L0150A BOLT, 3/8-16 X 1.50 PLATED HB038L0300A BOLT, 3/8-16 X 3.00 PLATED HF12V5OLO FITTING, ELBOW 12 ORFS 12 STOR 45 DEG.
- Page 22 DECAL GROUP CP12LF and CP16LF...
- Page 23 DECAL GROUP CP12LF and CP16LF Cold Planer ITEM QTY PART NO. DESCRIPTION D0163 DECAL, FLYING OBJECTS D0164 DECAL, READ MANUAL D0165 DECAL, CRUSHING HAZARD D0166 DECAL, ROTATING CUTTER D0167 DECAL, INJECTION HAZARD D0168 DECAL, LIFT POINT D0169 DECAL, TIE DOWN...
-
Page 24: Hydraulic Schematic
HYDRAULIC SCHEMATIC CP12LF and CP16LF COLD PLANER... -
Page 25: Specifications
SPECIFICATIONS CP12LF CP16LF Cutting Width 12 inches 16 inches Cutting Depth 0 to 5 inches 0 to 5 inches Number of Teeth Min. Hydraulic Flow 15 g.p.m. 15 g.p.m. Max. Hydraulic Flow 25 g.p.m. 25 g.p.m. Minimum Pressure 1500 p.s.i. -
Page 26: Warranty
RoadHog makes no other warranty, expressed or implied. This warranty shall be for a period of 12 months for parts and labor from the date the product is placed into service, providing RoadHog is supplied with the in service date. - Page 27 Published hourly shop rate $ __________ multiplied by ( 75% of published shop rate ) RoadHog reimbursement rate___________ X ______ hours = 1. Requested labor $ __________ Miles traveled ______ RoadHog reimbursement rate multiplied by 1.00 X______ miles = 2.
-
Page 28: New Machine Delivery Report
P.O. Box 519 Brownsburg, IN 46112 Phone 317-858-7050 Fax 317-858-7053 www.roadhog-inc.com New Machine Delivery Report Model number_____________________ Date __________________ Serial number_____________________ Delivery Location___________________ Dealer personnel making the delivery / start-up_______________________________ Comments / Condition ______________________________________ ______________________________________ Any items needing correction _______________________________... -
Page 29: Owner Information Card
Phone number _____________________________ This sheet must be faxed or mailed to RoadHog within 30 days of delivery. The warranty period is established once this information is received. No warranty will be processed until this information is on file with RoadHog.
Need help?
Do you have a question about the CP12LF and is the answer not in the manual?
Questions and answers