Advertisement
Quick Start Guide
FRONT
2
1
Use an HDMI cable to connect the box to the HDMI IN port on your TV.
2
Connect the device's cable connector to a cable outlet in your home.
3
Connect the power cord to the POWER port on the back of the box and
plug the AC power adapter to a power outlet.
The device must use the power supply that comes with it to work properly. Other power
supplies will not work. Although they may allow the device to power on, service will be
impaired and optimal performance cannot be guaranteed.
4
Press on/off button.
Pairing your TV's remote control to this Cisco set top box depends on the manufacturer
of the TV remote control. Detailed instructions for most manufacturer brands can be found
the UR5L 9000 series operating instructions here
on
"Step 5 - Programming the Remote Control".
If you have any problems pairing your remote, contact our technical support
team 24/7 at 888.659.6009.
Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the
device outdoors. Keep the device in an environment between 0°C - 40°C (32°F -104°F). To avoid overheating, do NOT place any object on top of the device.
SA8642 HDC/
SA4642
DVR Set Top Box
BACK
4
3
located under
1
Advertisement
