Table of Contents
Advertisement
Quick Links
No.4319 Velocity EP
Wing Span: 32"(813mm)
Motor: 400 Included
Warranty
:This kit is guaranteed to be free from defects in material and workmanship at the date of
purchase.
It does not cover any damage caused by use or modification. The warranty does not extend
beyond the product itself and is limited only to the original cost of the kit. By the act of building this user-
assembled kit, the user accepts all resulting liability for damage caused by the final product. If the buyer
is not prepared to accept this liability, it can be returned new and unused to the place of purchase for a
refund.
Notice: Adult Supervision Required
product requires adult supervision. Read through this book completely and become familiar with the
assembly and flight of this airplane. Inspect all parts for completeness and damage. Contact Thunder
Tiger authorized agent if you find any problem or need tech support.
R R / / C C E E P P F F l l y y i i n n g g W
Length: 23.5"(596mm)
Prop: 5 x 5 Included
Radio: 3 CH w/ Elevon Req'd
W i i n n g g
Wing Area: 263.5 sq.in. (17dm
:This is not a toy. Assembly and flying of this
2
)
Weight: 19.8oz. (560g)
Servo: 2 Micro Servos Req'd
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for THUNDER TIGER Velocity EP
- Page 1 R R / / C C E E P P F F l l y y i i n n g g W W i i n n g g No.4319 Velocity EP Wing Span: 32"(813mm) Length: 23.5"(596mm) Wing Area: 263.5 sq.in. (17dm Weight: 19.8oz.
- Page 2 INT T RO O DU U C C T T IO O N All of us at Thunder Tiger want to thank you for choosing the Velocity EP. This Kit has been engineered to go together quickly and easily while still providing you with great looks and exceptional flying performance.
- Page 3 PARTS DRAWING Open the box and check that you have all the parts as shown below. If anything is missing please contact your dealer AS6338 Foam Wing AS6349 Decal Decal (L/1, R/1) Foam Wing (1) AS6347 Propeller Velcro (1) 5x5 Propeller (1) Hatch Cover (L/1, R/1) AS6339 Vertical Fin AS6348 Prop Hub...
- Page 4 PRE-ASSEMBLY NOTES 1. If you are not an experienced R/C pilot plan to have a fully competent pilot help you to learn to fly your Velocity EP. This will help you to be successful much faster and also avoid potential damage to your model.
- Page 5 V 4 @ @ @ @ @ @ @ ( Y ? g I 4 @ @ @ @ 0 Y h servo well is molded base on Thunder Tiger C1016 micro servo. If you are using other brand of micro servo, you may need to trim the servo well for best fit or apply double side tape for security.
- Page 6 ASSEMBLY / MOTOR, CANOPY with deck installed. Make sure the deck is free and it could be removed from fuselage. 12. Next glue the part A and B to complete whole motor mount. Secure motor with M2.6x8 screws and washers. 16.
- Page 7 ASSEMBLY / VERTICAL FINS 19. Locate two vertical fins. Apply decals on the fin. 23. Connect all wires to receiver then place ESC, Note: Start from leading edge to apply the decal. Battery and Receiver as shown. 20. Note the orientation vertical fin. Photo shown is 24.
- Page 8 Thank you for purchasing this Velocity EP from Thunder Tiger and we look forward to providing you Initial Setting of Elevon with other great R/C products in the future.
Need help?
Do you have a question about the Velocity EP and is the answer not in the manual?
Questions and answers