Product Description - YAMADA KGK-400 Series Instruction

[Shutdown and storage]
- When leaving the product unused for a long time (more than a week) or shutting it down;
- remove material inside completely and wash the product and
- release material supply pressure.

2. Product Description

KGK metering valves are able to apply metered shots of media such as greases and adhesives. By replacing a built-in
metering cylinder, KGK metering valves cover metered shot volumes between 0.5mL to 50mL.
Air Inlet
（Rc1/4）
Material Outlet
（Rc1/4）
Material Inlet
（Rc1/4）
- In grease metering valves, NBR and urethane rubber are used in seal parts. Do not try to handle any
material incompatible with these parts. If need arises, use adhesive metering valves which use seal parts
made with fluorine resin.
- Release residual pressure inside the valve BEFORE maintenance, inspection, and repair.
CAUTION
CAUTION
3
Metering Valve
定量弁本体
Body
Metering Cylinder 定量シリンダ