ALORAIR Cleanshield HEPA 550 Owner's Manual

Hide thumbs Also See for Cleanshield HEPA 550:

Advertisement

Quick Links

Cleanshield HEPA 550
Owner's Manual
READ AND SAVE THESE INSTRUCTIONS
Seaira Global LLC
14021 NC Highway 50 Surf City, NC 28445
910-660-0962
sales@seairaglobal.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cleanshield HEPA 550 and is the answer not in the manual?

Questions and answers

Summary of Contents for ALORAIR Cleanshield HEPA 550

  • Page 1 Cleanshield HEPA 550 Owner's Manual READ AND SAVE THESE INSTRUCTIONS Seaira Global LLC 14021 NC Highway 50 Surf City, NC 28445 910-660-0962 sales@seairaglobal.com...
  • Page 2 AIR SCRUBBER WARNING! Please note that the CleanShield 550 should only be used with parts approved by AlorAir. The use of unauthorized parts or alterations to the machine could void your warranty. Contact an approved distributor for further assistance. To Avoid the Risk of Fire or Electric Shock: •...
  • Page 3 AIR SCRUBBER Removable Intake Panel The CleanShield 550 is equipped with a removable panel on the intake side of the machine. The removable panel is quite useful in remediation applications, so you can draw air out the room and create more negative pressure (use a manometer to monitor air pressure). To use panel: 1.
  • Page 4 INSTRUCTIONS SETUP 1. Place the CleanShield HEPA 550 so that it is in the upright, vertical position. 2. Plug the machine into a standard 115 volt outlet. Note: Each unit needs 3 amps to operate. 3. Power the unit on and adjust the speed by turning the variable speed control. The maximum speed is 550 CFM and the minimum speed is 270 CFM.
  • Page 5 AIR SCRUBBER Breathing Hazard • When using the CleanShield HEPA 550 in a containment area, always turn off power to open combus- tion appliances, such as firelaces, furnaces, water heaters, and HVAC systems, to avoid the risk of backdrafting carbon monoxide fumes.
  • Page 6 AIR SCRUBBER SAFETY NOTES • Always unplug the unit prior to performing any maintenance. • Check the power cord for damage (fraying, cuts, etc.) before use. • Verify that the GFCI outlet is working by powering on the machine and pressing the red GFCI test button.
  • Page 7 AIR SCRUBBER Warranty Exclusions: DAMAGE DUE TO THE FOLLOWING IS NOT covered under warranty 1. Acts of Nature- including but not limited to: flooding fire water damage hurricane/storm damage 2. IMPROPER USAGE- Including but not limited to: misuse, abuse, or tampering whether intentional or accidental improper installation or design improper voltage lack of normal care...

Table of Contents