RICHVIEW 1-1/2" Headrail 1" Corded Aluminum Blind Installation And Care Instruction

1-1/2" Headrail 1" Corded Aluminum Blind Installation and Care Instruction
Aluminumblind
Aluminum Blind
2. Tools you may need
•
Drill with bits
•
Screwdriver
•
Metal tape measure
•
Pen
3A. Install the blind with the hidden brackets
•
Mark the bracket locations, making sure the brackets will not interfere with any mechanism
or other internal headrail parts. The outermost brackets should be installed about 1/4 inch
from each end of the blind. If you have more than 2 hidden brackets, install all remaining
brackets towards the center of the blind.
•
Install the brackets using screws (included) and tighten them completely.
•
Make sure all brackets are aligned and level with each other.
Inside Mount
4A. Install the blind
•
Fit the front lip of the headrail over the hook on the front of the hidden brackets.
•
Push the blind toward the back of the brackets with a "click".
3B. Install the blind with the box brackets
• Install the box brackets at the ends of the headrail. Use 2 screws per box bracket.
• One center support is applied when the blind is wider than 48"W, or two center supports for the blind wider than 100"W.
• The spacer is optional and is installed behind the box bracket when needed.
L
max
1. Identify your aluminum blind and parts
you are purchasing.
Hidden brackets & screws
Wand
Cord cleat & screws
(not included)
(or choose to install the blind with the box brackets, refer to step 3B~5B.)
Outside Mount
(or choose to install the blind with the hidden brackets, refer to step 3A~5A.)
1-1/2" Headrail 1" Corded Aluminum Blind Installation and Care Instruction
(your parts may vary, depending on the custom request & size of the blind
Extension brackets
Box brackets & screws
(optional)
(optional)
Center support & screws
Hold down brackets
(optional with the box brackets,
& screws (optional)
used on the larger blinds)
•
Install the blind with the extension brackets (optional)
o Install the extension bracket with at least 2 screws.
o Attach the hidden brackets to the extension brackets
Extension bracket
5A. How to remove the blind from the hidden brackets
•
Unlock the hidden brackets with a flat head screwdriver.
Center Support
L
max
Inside Mount
Optional - Add a spacer behind the
hidden bracket or the box bracket if
needed.
with the screws.
Center Support
L
max
Outside Mount
Spacers (optional)
1