1. Manuals
  2. Brands
  3. Schertler Manuals
  4. Control Unit
  5. Arthur ART48-MICLINE X
  6. User manual

Schertler Arthur ART48-MICLINE X User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V1
ACOUSTIC FIDELITY
arthur
FORMAT48 - MICLINE X
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arthur ART48-MICLINE X and is the answer not in the manual?

Questions and answers

Summary of Contents for Schertler Arthur ART48-MICLINE X

  • Page 1 ACOUSTIC FIDELITY arthur FORMAT48 - MICLINE X USER MANUAL...

  • Page 2: Important Safety Information

    INTRODUCTION Thank you for choosing the ART48-MIC/LINE X module. This high-end, Class-A, 4-channel input unit features sophisticated MIC/LINE switching capabilities that enable either a microphone or a line level sound source to be connected to each channel as and when needed, with automatic adaptation of the sensitivity range and input impedance.

  • Page 3: Operational Safety

    Schertler technical assistance centre. (For more information, contact us at the address on the last page of this manual.)
  • Page 4 ART48-MICLINE X The MIC/LINE X’s four input channels are identically equipped. 1. XLR input: This input can receive balanced signals from -63 dBu to +6 dBu in MIC mode - a range of 69 dB, which therefore permits you to connect any audio signal to the mic unit.
  • Page 5 SCHERTLER DYN series. A double bass or ‘cello might get in resonance at ca. 150 Hz, whereas guitars and similar musical instruments will do so at ca.
  • Page 6 ART48-MICLINE X The HI, MID and LOW rotary controls all have a detent at their mid positions. This indicates the filter’s “flat” position. 14. UNIT ON/OFF: The UNIT ON button connects/disconnects that channel’s output routing for all outputs (AUX1 to AUX6 and L/R), except the PFL routing. This function is similar to the MUTE button used on other mixers, but here the functionality is reversed.

  • Page 7: Technical Information

    TECHNICAL INFORMATION ART48 - MIC/LINE X: SIGNAL FLOW...
  • Page 8 TECHNICAL INFORMATION Input impedance: 4.6 kohm MIC mode 43 kohm LINE mode Output impedance (Bal. DIR. OUT): 240 ohm Maximum input level: +24 dBu (@1kHz; THD<0.5%) LINE mode Maximum output level (headroom): +30 dBu (@1kHz ; THD <0.5%) Sensitivity: -63 dBu to +6 dBu MIC mode -21 dBu to +8 dBu LINE mode...
  • Page 9 NOTES...
  • Page 10 NOTES...

  • Page 11: Warranty

    COPYRIGHT This manual is the property of Schertler S.A. and, as such, is subject to Swiss copyright law. No part of this manual should be reproduced, edited or distributed without prior consent from Schertler.

Table of Contents