Forest garden SBP106M Instructions

Making British gardens great
WORKSHOP BASE
We recommend using the following tools (NOT SUPPLIED):
Tape Pozidrive
Measure Screwdriver
It's vital that you build your new shed base on level ground in your
desired location.
INSTRUCTIONS
1
Start at the corners. Pre-drill and
screw through the face of the one
timber part into the end of the
other. Use the section layouts below
for guidance on positioning.
SECTION LAYOUTS
Identify your chosen shed base to follow the correct construction and
measurements provided:
10'
SBP1010M
317mm
10'
12'
SBP128M
347.83mm
8'
Missing Something?
Call our aftersales team on
0333 777 7089
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
Drill & 2mm
Drill Bit
2
Repeat this process for the
opposite corners to form the overall
outer frame. Ensure that all edges
and faces of the timber parts are
flush.
10'
347.83mm
8'
15'
317mm
10'
Need more information?
Call our technical team on
0333 321 3142
INSTRUCTIONS
Spirit Level
3
Measure where the central timber
part(s) will be placed. Use the
measurements from the section
layout below for your chosen shed
base. Mark, pre-drill and screw
them into place.
SBP108M
SBP1510M
10'
ISSUE: 0219
FIXING PACK CODE: WBPMFP
FIXING PACK CONTAINS:
PLEASE KEEP PLASTIC BAGS AND
SMALL PARTS AWAY FROM CHILDREN
REMINDER
Always pre-drill
before screwing.
4
Repeat the first 3 steps for each base you
need to construct. Once all individual
bases are constructed, line up the bases
in the correct orientation. Ensure they
are flush. Use the section layouts below
for guidance on positioning.
Indicates the timber orientation during
construction. This will apply to all of
the corners for your base.
10'
SBP106M
397.75mm
6'
20'
317mm
Visit our website for spare
instructions and more
information
www.forestgarden.co.uk
SBP2010M