Advertisement
Quick Links
Advertisement
Summary of Contents for annke Network Mini PT
- Page 1 Camera Network Mini PT Dome Camera Quick Start Guide...
-
Page 2: Table Of Contents
Table of Contents 1 Appearance Description................. 2 1.1 Overview..................2 1.2 Installing SD Card.................5 2 Installation....................6 3 Accessing via Phones................8 4 Software Download And FAQ...............13... -
Page 3: Appearance Description
Appearance Description 1.1 Overview... - Page 4 Description of Network Mini PT Camera Description Silicone Gasket Dome Drive WPS(Wi-Fi Protected Setup) Button Micro SD Card Slot Photic Cover Lens Lens Ring PIR(Passive Infrared) sensor Mounting Base 10M / 100M self-adaptive Ethernet interface Alarm Input/output Reset Audio Out...
- Page 5 Description Flicking blue: No network connection. Solid red: Camera is armed. Flicking red: Camera is not working properly. Solid green: Camera is connected to the platform. You can disable the status LED when you access the camera via browsers. Go to Configuration—Advanced Configuration—System—Service, and check off the checkbox of Enable Status LED to disable the status LED.
-
Page 6: Installing Sd Card
(3) The camera will automatically turn 1 minute later;it will stop turning after 40 seconds, then the status lamp turns blue and starts to flash, indicating reset successful. 1.2 Installing SD Card Steps: 1. Pull the removable cover on the mounting base outwards and move it aside. -
Page 7: Installation
Installation Steps: 1. Drill the screw holes on the ceiling according to the supplied drill template. 2. Align the screw holes on the ceiling and adapter plate, and then fix the adapter plate to the ceiling with the supplied screws. - Page 8 3. Align the mounting base of the camera to the adapter plate, and rotate the camera clockwise until it is locked up by the three bayonet joints on the adapter plate. 4. Adjust surveillance view angle. 1) Hold and rotate the main camera body to adjust the view angle in the pan direction: [0°~355°].
-
Page 9: Accessing Via Phones
Accessing via Phones Note: Make sure your phone connected to Wi-Fi 1. Download and Install the APP Search Annke View in the Apple App Store or Google Play, and install the App on your smart devices. 2. Power on the IP Camera... - Page 10 Input Wi-Fii information Configure Wi-Fi Input User Name “admin”(no password) Activate the Device Create a New Password Start Live Viewing on LAN...
- Page 11 IP camera connected to the network successfully. (4)Make sure your phone and the device are in the same network .Open the app Annke View , enter Devices—Online Device.You can see the IP address,noticing “Inactive”,then activate the device step by step.
- Page 12 (3) Make sure your phone and your device are in the same network . Open the app Annke View , enter Devices—Online Device. You can see the IP address, noticing “ Inactive”, follow the step to activate the device and remember the IP address.(According to WPS Pairing at step(4) (4) Make sure your PC and your device are in the same network.
- Page 13 4. Configure the Annke Cloud to get live viewing anywhere Please configure the Annke Cloud as the following steps: Select “Cloud P2P” Register a P2P Account Scan the QR code Add New Device Input the Verification Code Click Live View...
-
Page 14: Software Download And Faq
If your have problems when using the device or need to download th e content contained in the CD, please follow the steps below. 1.Visit www.annke.com 2.Search I61DQ or I61DS 3.Click the “Downloads” to choose and get what you want in the list Tech support: support@annke.com...
Need help?
Do you have a question about the Network Mini PT and is the answer not in the manual?
Questions and answers