Rutland County Storyteller Assembly Instructions

Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
1 x Chair back
1 x Seat panel
1 x Lower frame
2 x Arm uprights
2 x Arms
3 x 60mm, 7 x 70mm & 4 x 120mm M8 Coach
screws
4 x 75mm screws
Assembly Instructions
The storyteller chair
Tools required
10mm socket or spanner
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
The Storyteller chair
1