Table of Contents
Related Manuals for AAS Advantage DKE 26-100sg
Summary of Contents for AAS Advantage DKE 26-100sg
- Page 1 AMERICAN ACCESS SYSTEMS, INC. ADVANTAGE DKE INSTALLATION AND PROGRAMMING INSTRUCTIONS MODEL 26-100sg Technical Support: 303-799-9757 Monday thru Friday 8:00 a.m. to 5:00 p.m. PLEASE READ BEFORE USING THIS EQUIPMENT Rev b page 1...
- Page 2 If your AAS product is defective and returned within 2 years of the date of purchase, we will repair it or, at our option, replace it at no charge to you. If we repair your AAS product, we may use new or reconditioned parts. If we choose to replace your AAS product, we may replace it with a new or reconditioned one of the same or similar design.
-
Page 3: Parts Checklist
PARTS CHECKLIST Enclosed with this box you should have the following items. Description Control Station Security Screws Installation Instructions If any of the above items are missing from this box, contact American Access Systems TOOLS YOU WILL NEED Wire nuts or appropriate connectors Wire strippers Wire cutters Standard 2 x 4 electrical box... -
Page 4: Step 1-Mounting The Unit
STEP 1-MOUNTING THE UNIT Page 3 tells you what tools and instruments you will need to install your unit and presents a parts check list. Make sure to have all the tools listed. Upon opening the box, check off the items enclosed with the unit. If any items are missing from your unit, contact American Access Systems immediately. - Page 5 THE MASTER CODE AND ACCESS CODES Your unit may be programmed with 100 multiple (4 digit) ACCESS CODES . The MASTER CODE is a 4 digit programmable code used for accessing the program mode. Note: The 1251 master code will not activate the relay and open the access device.
- Page 6 Should you make an entry error, simply press the * key and re-enter the correct data. You may continue entering access codes until the memory is full or the # is pressed. You may select any 4 digit access code that is not already in use by the system.
- Page 7 To program or change your latch code enter the following; (MASTER CODE) + 5 + (LATCH CODE) Should you make a code entry error, simply press the * key and enter the correct code. You may select any 4 digit latch code you wish.
- Page 8 30-023A Circuit Board Layout MEMORY CHIP BUZZER RESET SWITCH POWER HARNESS RELAY page 8...
-
Page 9: Access Code
ACCESS CODE LOG SHEET PAGE_____OF_____ Master Code________________ ACCESS CODE NAME page 9... - Page 10 NOTES: page 10...
- Page 11 NOTES: page 11...
- Page 12 American Access Systems Inc. 7079 South Jordan Road Englewood, Co. 80112 Sales: 1-800 541-5677 E-mail: sales@americanaccess.com Customer Service: 1-303-799-9757 E-mail: customerservice@americanaccess.com Tech-Support: 1-303-799-9757 E-mail: techsupport@americanaccess.com page 12...
Need help?
Do you have a question about the Advantage DKE 26-100sg and is the answer not in the manual?
Questions and answers