Weathermatic SMARTLINE SLRC Quick Start Manual
  1. Manuals
  2. Brands
  3. Weathermatic Manuals
  4. Remote Control
  5. SMARTLINE SLRC
  6. Quick start manual

Weathermatic SMARTLINE SLRC Quick Start Manual

Hide thumbs
1
2

Advertisement

Table of Contents

Basic Operations

1
ON button:
Turns ON remote.
(Hold ON button down until display turns on.)
Turns ON zones.
Note: The first time you use the remote, turn on zone
1 to automatically download zone count from
SmartLine controller.
Antenna indicates two-way transmission of signal.
2
OFF button:
Turns OFF remote.
(Hold OFF button down until display turns off.)
Turns OFF zones.
Note: Remote will automatically turn off after 2 minutes
of inactivity. controller.
3
UP and DOWN button:
Scroll between display options by pressing the UP and
DOWN buttons.
SLRC remotes are compatible with SmartLine SL1600 and SL4800 controllers with firmware version 3.05 and
greater; SL800 version 2.00 and greater. To determine which firmware version is in a SmartLine controller, rotate
the dial to Advanced Functions. Press an Adjust Value button until About is displayed. Press the Next button
and the SmartLine controller's firmware version will be displayed. Older version SL1600 control panels can be
upgraded by purchasing a new SLCPSA control panel.
For installation and setup information refer to Sections 1.5 and 1.6.
SLRC Remote Control
Quick Start Guide
OFF
Battery compartment for 2 AAA alkaline
batteries. Substitute Lithium batteries for
longer life.
(Lo) Low Battery indicator.
888-4 THE PRO
®
ON

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMARTLINE SLRC and is the answer not in the manual?

Questions and answers

Summary of Contents for Weathermatic SMARTLINE SLRC

  • Page 1 SLRC Remote Control Quick Start Guide Basic Operations ® ON button: Turns ON remote. (Hold ON button down until display turns on.) Turns ON zones. Note: The first time you use the remote, turn on zone 1 to automatically download zone count from SmartLine controller.
  • Page 2 SLRC Remote Control Quick Start Guide Standard Functions (1 to 48) Indicates zone number. Use UP and DOWN buttons to select zone. Press ON to start zone. Zones will run for the user defined maximum run time set in the remote (range 1-90 min, default 2 min).

Table of Contents