TECHWOOD TCFI-1050 Instruction Manual page 8

• Place the motor base on a flat surface, such as a work surface in a kitchen, and
ensure that the unit is stable.
• Place the strainer holder on the motor base so that the spout fits into the slot on
the side of the motor base.
• Place the fruit pulp tray so that it locks firmly on the foot of the unit.
• Carefully, Lock stainless strainer on its support.
• Do not touch the sharp and aggressive parts in the bottom of the strainer.
• Ensure that the support of the strainer is properly positioned on the base, so that
the gear axis is engaged in the support.
• Ensure that the strainer rotates uniformly.
• Place the lid on the device so that it covers both the pulp bin and centrifuge.
• Ensure that the cover is adjusted on the base.
• Raise the locking mechanism in a vertical position and ensure that it engages on
the lid and blocks.
Note: The locking mechanism makes a clicking sound when properly positioned.
• Place the glass provided, a suitable bowl or other container under the spout.
• The device is ready for use.
 Unroll the power cord completely.
 Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
 Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
 Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
 Never modify the appliance in anyway.
 Always disconnect from power supply if it is left unattended and before
assembling, disassembling or during cleaning.
 Stop the machine and disconnect it from the power supply before changing
accessories or approaching parts that are mobile during operation.
 Potential injuries can occur with misuse. Care shall be taken when handling,
emptying the bowl and during cleaning.
 Regarding the instructions for operating time and cleaning, refer to the
corresponding section of the manual.
• Switch on the unit by turning the selector to position "1" (low speed) or "2"
position (high speed).
• Speed 1 is adapted tender fruit and vegetables.
• Speed 2 is adapted to extract the toughest fruit and vegetable juices.
• Insert the fruits and / or vegetables selected in the device into the funnel.
ASSEMBLY
USE
8