Tekvox ShareView Wireless User Manual

Wireless av content sharing & byod collaboration system (quad viewer)
Table of Contents

Advertisement

Quick Links

ShareView Wireless
79060-WPS User Manual
ShareView Wireless
Wireless AV Content Sharing & BYOD collaboration System
(Quad Viewer)
All Rights Reserved
Version: 79060-WPS_2020V2.0
www.tekvox.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ShareView Wireless and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tekvox ShareView Wireless

  • Page 1 ShareView Wireless 79060-WPS User Manual ShareView Wireless Wireless AV Content Sharing & BYOD collaboration System (Quad Viewer) All Rights Reserved Version: 79060-WPS_2020V2.0 www.tekvox.com...
  • Page 2 ShareView Wireless 79060-WPS User Manual Preface Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different product model specifications may vary. This manual is only for operation instruction, please contact the local distributor for maintenance assistance.
  • Page 3 ShareView Wireless 79060-WPS User Manual Safety Precautions To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for further reference.  Unpack the equipment carefully, and save the original box and packing material for possible future shipment ...
  • Page 4: Table Of Contents

    ShareView Wireless 79060-WPS User Manual Table of Contents 1. Product Introduction ........................8 1.1 Features ............................... 8 1.1.1 WMS-10 & WMS-20/WMS-40: ....................8 1.1.2 WMT2-C/WMT-Mini/WMT3-H/WMT3-HC: ................8 2. Specifications ..........................9 3. Panel Layout ..........................10 3.1 Hardware Interface ........................... 10 3.1.1 WMS-10/20/40 Front Panel ....................
  • Page 5 ShareView Wireless 79060-WPS User Manual 5. Quick-to-Start ..........................30 5.1 Mobile device: Wireless Connection ....................30 5.1.1 Enable Portable Hotspot: ......................31 5.1.2 Enable LAN Connection ......................31 5.2 Pairing Transmitter with Base Unit ....................32 5.3 Mirroring ............................34 5.3.1 PC/Laptop ..........................
  • Page 6 ShareView Wireless 79060-WPS User Manual 6.4 System Settings ..........................67 6.4.1 Buttons ............................67 6.4.2 Date & Time ..........................68 6.4.3 Auto Standby ..........................70 6.4.4 Language ..........................71 6.4.5 Reset ............................72 6.4.6 Configuration File ........................72 6.5 Security Settings ..........................73 6.5.1 Security Level ...........................
  • Page 7 ShareView Wireless 79060-WPS User Manual 8.1.4 Options for Microsoft Windows PC/Laptop – Extended Screen ......... 89 8.1.5 MAC OS PC/Laptop with Dongle .................... 92 8.1.6 Mac OS PC/Laptop without Dongle ..................93 8.1.7 Options for Apple MacOS, MacBook – Extended Screen ............. 94 8.2 Transmitting IOS Mobile Device ......................
  • Page 8: Product Introduction

    ShareView Wireless 79060-WPS User Manual 1. Product Introduction ShareView Wireless makes it simple to connect to or participate in a meeting. A typical ShareView Wireless kit contains one WMS Base Unit and two Transmitters e.g. WMT2-C/WMT1/WMT3- H/WMT3-HC/WMT-Mini. 1.1 Features 1.1.1 WMS-10 & WMS-20/WMS-40: ...
  • Page 9: Specifications

    ShareView Wireless 79060-WPS User Manual 2. Specifications HDMI output 1x HDMI 19-pin female connector Video Output Resolution 3840x2160@60Hz,3840x2160@30Hz, 1920x1080@60Hz Format Compliance HDMI1.4/HDMI2.0 1080P @ <60Hz Airplay for IOS devices Video Capacity: 1080P @ <60Hz "WirelessMedia" app 1080P @ <60Hz for all show-me button HDCP HDCP1.4/HDCP2.2...
  • Page 10: Panel Layout

    ShareView Wireless 79060-WPS User Manual 3. Panel Layout 3.1 Hardware Interface 3.1.1 WMS-10/20/40 Front Panel Name Description USB port for transmitter pairing, mouse control, Front USB connector USB touch screen, etc. Front USB-C connector USB-C port for pairing to transmitter...
  • Page 11 ShareView Wireless 79060-WPS User Manual USB port (1)  The USB port is used to update the software of the WMS-40.  The USB port is used for pairing the dongle and base unit when the transmitter is plugged-in.  The USB port is used for connecting a mouse to create/upgrade Launcher by clicking...
  • Page 12: Wms-20/40 Rear Panel

    ShareView Wireless 79060-WPS User Manual 3.1.2 WMS-10 & WMS-20/40 Rear Panel www.tekvox.com...
  • Page 13 ShareView Wireless 79060-WPS User Manual Name Description 2 channel analog audio output. Connect a 3.5mm mini-jack PC Line audio output connector from this jack to the line in jack of an audio system. Rear USB 3.0 USB port, for USB dongle pairing, mouse control, USB touch screen connector etc.
  • Page 14: Factory Reset

    ShareView Wireless 79060-WPS User Manual 3.1.3 Factory Reset Start up the Base unit.  When the Home Screen appears, press the reset button at the rear panel of the base unit with a pointed object, (e.g. a paper clip) until the “Factory Reset” page appears as shown below ...
  • Page 15 ShareView Wireless 79060-WPS User Manual Default Configuration Ethernet:  Proxy: None  DHCP: Enable Wireless network:  Frequency: 5GHZ  Channel: Auto  Auto change Wi-Fi hotspot password: 5 minutes Display & Audio  HDMI resolution: Auto  HDMI CEC: Device auto power off: ON ...
  • Page 16: Dongle Front Panel

    ShareView Wireless 79060-WPS User Manual 3.1.4 Dongle Front Panel WMT2-C, WMT-Mini, WMT3-H, and WMT3-HC are dongles used for toggling the presenting from PC on the main screen. Name Description USB can be plugged into a PC/Laptop (for sharing your screen) or...
  • Page 17 ShareView Wireless 79060-WPS User Manual LED ring indicator behavior (2)  When LED indicator is static green, it’s ready to project your PC desktop to the main screen.  When LED indicator is static red, 1) it can project your PC desktop to the screen, 2) pairing is complete.
  • Page 18 ShareView Wireless 79060-WPS User Manual Name Description HDMI Type C Using HDMI Type C connector of the button can be plugged into a connector PC/Laptop for sharing your screen. Touch the sensor button to start displaying the content of the Display Button PC/Laptop’s screen on the main screen.
  • Page 19 ShareView Wireless 79060-WPS User Manual Name Description Using USB connector of the dongle can be plugged into a USB connector PC/Laptop for sharing your screen. Using Type C connector of the dongle can be plugged into a USB-C connector PC/Laptop for sharing your screen.
  • Page 20: Software Interface

    ShareView Wireless 79060-WPS User Manual 3.2 Software Interface 3.2.1 Home Screen Name Description Wi-Fi Direct mode: internal access point is enabled Wi-Fi Infrastructure mode: “Client-Mode“ , Wi-Fi connection to router is established, icon displays the current signal strength. Wi-Fi Indicator...
  • Page 21 ShareView Wireless 79060-WPS User Manual PASS Wi-Fi password of base unit. Only displayed when timer is active; time until the password is Password-timer changed automatically. Generate new password manually for securing your Wi-Fi Refresh Wi-Fi-password network. Wi-Fi IP: address of base unit in wireless LAN Wi-Fi IP Assigned IP: address of base unit in LAN;...
  • Page 22: Installation

    ShareView Wireless 79060-WPS User Manual 4. Installation The installation chapter gives an overview of the different ways to install and connect the Wireless Media Base Unit. Overview:  Installation methods for the base unit o Table mounting o Wall mounting ...
  • Page 23 ShareView Wireless 79060-WPS User Manual How to install 1. Drill two holes in the wall as indicated on the drawing. Horizontal distance: 177 mm ± 0.15 2. At the bottom of Base Unit, turn in 2 flat screws into 2 holes to be fasten enough.
  • Page 24: Wiring Diagram

    ShareView Wireless 79060-WPS User Manual 4.2 Wiring Diagram 4.3 Power Connection The base unit can be powered by the external universal power adapter. 4.3.1 How to connect the external power adapter 1. Plug the power connector to the power adapter to the power input connector of the Base Unit 2.
  • Page 25: Power Over Ethernet

    ShareView Wireless 79060-WPS User Manual 4.3.2 Power over Ethernet If the LAN Ethernet switcher supports POE (Power over Ethernet), it will power up the base-unit instead of using the external power adapter. (WMS-40 LAN2 Port supports POE) 4.4 Video Connection 1.
  • Page 26: Audio Connection

    ShareView Wireless 79060-WPS User Manual 4.5 Audio Connection The Wireless Media transmitter can transmit the audio output of the PC and re-direct and send to the base unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5mm connector and via the HDMI output connectors simultaneously.
  • Page 27: Sound Is Not Sent Out

    ShareView Wireless 79060-WPS User Manual 4.5.3 Sound is not sent out The Wireless Media button will keep capturing and sending the audio of a PC, since a PC projects the desktop to the main screen. 1. Please be sure the button is static green and the PC is projected on the screen 2.
  • Page 28: Lan Connection

    ShareView Wireless 79060-WPS User Manual 4.6 LAN Connection The Base Unit can be connected to a local network or directly to a PC. For normal operation, a LAN connection is not necessary. When needed, it’s suggested to connect the WMS to the Internet.
  • Page 29: Usage Of Usb Device

    ShareView Wireless 79060-WPS User Manual 4.7 Usage of USB Device Note: Please use a USB mouse or touchscreen 1. To configure the Security level check buttons, DOWNLOAD BUTTON, INFO. 2. USB Passthrough/touchback (control the connected device via touchscreen). 3. To upgrade firmware.
  • Page 30: Quick-To-Start

    ShareView Wireless 79060-WPS User Manual 5. Quick-to-Start 5.1 Mobile device: Wireless Connection 1. Download the application named “Wireless Media” (for example scan QR-Code in Home screen) in Android Google Play market for Android mobile device. 2. For IOS devices, use Airplay to mirror the desktop.
  • Page 31: Enable Portable Hotspot

    ShareView Wireless 79060-WPS User Manual 5.1.1 Enable Portable Hotspot: Check that the SSID and PASS (Password) are shown on the Homepage, as shown below. 5.1.2 Enable LAN Connection Be sure the WMS is connected to the Network. When Local IP shows an active IP address, such as 192.168.3.32, it indicates WMS is successfully connected to the LAN and has an appointed IP...
  • Page 32: Pairing Transmitter With Base Unit

    ShareView Wireless 79060-WPS User Manual Please refer to the LAN-settings in Ethernet, as below. Default password for entering the Main menu on webserver console is “admin”. 5.2 Pairing Transmitter with Base Unit 1. Connect the USB of WMT2-C to either of the 2xUSB port of WMS, WMT-mini to USB port/type C port, WMT3-H (HDMI dongle) to USB port, WMT3-HC (Type C dongle) to type C port, to pair all the transmitters with base unit.
  • Page 33 ShareView Wireless 79060-WPS User Manual 2. When plugging in transmitters, the message table shows “Dongle is booting, please wait…” as shown below 3. Then, the message table shows “Pairing, please wait…” as shown below 4. After completing the pairing, the message table shows “Succeeded to pair!” on the home page, as shown below.
  • Page 34: Mirroring

    ShareView Wireless 79060-WPS User Manual When you buy additional transmitters or when a transmitter should be assigned to another base unit, the transmitter must be paired again. A transmitter can only be paired to one base unit at a time. The transmitter will always make a connection to the Base unit it was last paired to.
  • Page 35: Wmt-Mini

    ShareView Wireless 79060-WPS User Manual Note: For second-time users, once the transmitter is plugged into the PC, it will automatically be ready to share. ATTENTION: 1. For more security-conscious customers, please download the “WirelessMedia-pro.exe” instead of “WirelessMedia-windows.exe” for the steps above.
  • Page 36 ShareView Wireless 79060-WPS User Manual 3. It will show “Ready to share”, click to share the desktop to screen. Note: For second-time users, WMT-mini will automatically share screen, no need to click “Launcher”. www.tekvox.com...
  • Page 37: Non-Driver Based Transmitter

    ShareView Wireless 79060-WPS User Manual 5.3.3 Non-Driver Based Transmitter WMT3-H (HDMI dongle) /WMT3-HC (USB-C dongle): 1. Plug USB port of WMT3-H/USB-C port of WMT3-HC to base unit to pair. 2. Plug USB port and HDMI port of WMT3-H /USB-C port of WMT3-HC to PC/Laptop/MacBook.
  • Page 38: Mobile Devices

    ShareView Wireless 79060-WPS User Manual 5.3.5 Mobile Devices Sharing on Android devices 1. Open the “WirelessMedia” application. 2. Connect your mobile device to one of the displayed Wi-Fi networks. 3. Open the “WirelessMedia2” application in your mobile device, and you will see the Home Page of “WirelessMedia2”...
  • Page 39 ShareView Wireless 79060-WPS User Manual 4. Select the base unit you want to connect to, and enter password and project. 5. After completing the pairing, it shows OSD “Welcome ***” on the home page. For example, if connected by a HUAWEI-PLA-AL00, it shows a “Welcome HUAWEI-PLA-AL00” on screen, as shown below.
  • Page 40 ShareView Wireless 79060-WPS User Manual 9. Click “Fullscreen” to be full screen in the main screen when more than one signal is connected and shared. 10. Click the upper right corner icon & check the “WirelessMedia2” application version information. www.tekvox.com...
  • Page 41: Sharing On Ios Devices

    ShareView Wireless 79060-WPS User Manual 5.3.6 Sharing on iOS Devices With AirPlay technology, a user can stream his screen or music, (YouTube-) videos, pictures … wireless to Base-unit. Connect your iOS device with the same Wi-Fi network as WMS. For IOS devices, activate the control center. Click the Airplay icon on your Apple device and select the target WMS to start projecting through the WMS to the main screen.
  • Page 42 ShareView Wireless 79060-WPS User Manual As soon as a presenter clicks with the mouse of the base-unit, or presses the touch-screen, the appropriate participants of the meeting are activated, another click at the arrow shows his picture at the main screen in full format. A red frame is shown for the active picture. The button indicates play button, click to show screen.
  • Page 43: Whiteboard & Annotation

    ShareView Wireless 79060-WPS User Manual 5.5 Whiteboard & Annotation Whiteboard and Annotation requires an HID compatible device, such as interactive white board or interactive touch screen. It is easy to use and makes collaboration in your business more productive and effective. Documents can be easily written, edited, captured, and shared.
  • Page 44: How To Start Whiteboard Or Annotation Mode

    ShareView Wireless 79060-WPS User Manual 5.5.1 How to Start Whiteboard or Annotation Mode Press the “Preview window” on the Home Screen to start this mode. Tap (click) the LEFT-arrow (1), located on the right side of the screen, and select...
  • Page 45 ShareView Wireless 79060-WPS User Manual Use the toolbar to select one of the following functions. Icons Function Add an empty page Tool bar 1 Delete the actual page Display previous or next page Undo: one step backward in changes Redo: one step forward in changes...
  • Page 46: Annotation

    ShareView Wireless 79060-WPS User Manual Save the current screenshot on local storage Tool bar 4 (PNG+WMN) File options Close Whiteboard to go back to Home screen, actual project can be saved on local storage (WMN) File options:  Open WMN-file from local storage and continue/edit an older project ...
  • Page 47: Download The Drawings To Connected Users

    ShareView Wireless 79060-WPS User Manual Use the toolbar to select one of the following functions. Icons Function Undo: one step backward in changes Redo: one step forward in changes Erase part of drawings or annotation, change diameter by a longer tap...
  • Page 48: Web Setting Management Configuration

    ShareView Wireless 79060-WPS User Manual 6. Web Setting Management Configuration Connect base unit ID & Password or LAN IP to PC and enter Wi-Fi IP browser page to configure settings of base unit. The “WirelessMedia-windows.exe” and “WirelessMedia-Pro.exe” for windows PC, “WirelessMedia-macOS.app” for Mac OS X, “user manual” and “WirelessMedia” for Android can be downloaded here.
  • Page 49 ShareView Wireless 79060-WPS User Manual Click “Console” in the top right corner to enter into menu to configure. A password is required to enter the configuration menu. The default password after Reset is “admin”. You can change the password in menu “Security setting”.
  • Page 50 ShareView Wireless 79060-WPS User Manual The main interface of Settings is shown below, including Network settings, Display & Audio, Moderator control, System settings, Security settings, Firmware upgrade, Other settings, and About device. www.tekvox.com...
  • Page 51: Network Settings

    ShareView Wireless 79060-WPS User Manual 6.1 Network Settings 6.1.1 Wireless Network To take the full benefits of Wireless Media’s possibilities, WMS should be properly integrated in the organization’s network (company/university/school). This wizard allows a user to create a custom configuration for integration of Wireless Media into the existing wireless infrastructure in larger organizations.
  • Page 52 ShareView Wireless 79060-WPS User Manual 6.1.1.1 Wireless Network Configuration Wizard Enter a device name for the Base unit. We recommend a descriptive name. The default name is “WMS-XXXX”. Only "a-z","A-Z","0-9","-_" and space are legal characters. Click “Next step”. The following three connection methods are available:...
  • Page 53 ShareView Wireless 79060-WPS User Manual 6.1.1.2 Wireless Direct Mode After a Factory Reset, the WMS base unit will start up in the default Stand-Alone “Wireless direct mode” configuration, where the Base-unit creates its own wireless access point, which all transmitters use to connect. This is typical for a quick setup for small group meetings. The Wi-Fi icon for the “Wireless direct mode”...
  • Page 54 ShareView Wireless 79060-WPS User Manual Click “Next step” to Set up Wi-Fi access point. Set-up Wi-Fi access point includes: Frequency, Channel, Password. Frequency: Click to select 2.4 GHz or 5 GHz Wi-Fi frequency. Default is 5 GHz. Channel: Click to select the Wi-Fi channel. Default is 5 GHz, Auto.
  • Page 55 ShareView Wireless 79060-WPS User Manual 6.1.1.3 Wireless Infrastructure Mode Wireless Media can connect to a wired and a wireless network simultaneously. The basic unit is firmly connected to the company network with LAN. Guest users connect to Wi-Fi "Guest" access.
  • Page 56 ShareView Wireless 79060-WPS User Manual The dongle is connected to the Wi-Fi access Point of Guest network, which in turn is connected to the internal Wi-Fi access Point of Wireless Media. (The dongle can also be configured to connect to the enterprise’s access point.) Mobile users stay connected to their current network and have access...
  • Page 57 ShareView Wireless 79060-WPS User Manual Wi-Fi name of guest and staff will be shown on home screen after “Submit settings”. After submitting successfully, please re-pair dongle with base unit. “Dongle connects to base unit via LAN.” Choose a LAN network which is used for the company staff users.
  • Page 58 ShareView Wireless 79060-WPS User Manual Click “Next step” to edit or change Guest network SSID and Staff network SSID. Wi-Fi name of guest and staff will be shown on home screen after “Submit settings” After submitting successfully, please re-pair dongle with base unit.
  • Page 59: Ethernet

    ShareView Wireless 79060-WPS User Manual 6.1.2 Ethernet Configure the Ethernet settings. WMS-40 has 2 LAN port, if the base unit is connected with 2 LAN cable, you can configure as shown in the tab below: www.tekvox.com...
  • Page 60: Auto Change Password

    ShareView Wireless 79060-WPS User Manual 6.1.3 Auto Change Password The password remains unchanged for all participants of the meeting, while at least one dongle or a Wi-Fi network of a mobile device are connected with Base-unit. After the user is disconnected, a configurable time runs.
  • Page 61: Display And Audio

    ShareView Wireless 79060-WPS User Manual 6.2 Display and Audio 6.2.1 HDMI HDMI Resolution Select the resolution at HDMI output of Base-unit. Existing HDMI output resolution as below:  Auto  3840x2160 @30Hz  3840x2160 @60Hz  3840x2160 @50Hz  1920x1080 @60Hz ...
  • Page 62 ShareView Wireless 79060-WPS User Manual HDMI CEC The base unit supports CEC function if the connected display supports CEC function.  Device auto power off: o ON (Default): Display will automatically turn off when base unit is powered off. o OFF: Display will not automatically turn off when base unit is powered off.
  • Page 63: Audio

    ShareView Wireless 79060-WPS User Manual 6.2.2 Audio Choose audio output:  Jack: output only 3.5mm mini-jack audio.  HDMI: output only HDMI audio.  Jack & HDMI (Default): output Jack & HDMI audio Volume User can select volume of display from 0 to 100.
  • Page 64: Airplay Screen Quality

    ShareView Wireless 79060-WPS User Manual 6.2.3 Airplay Screen Quality Click to select the image quality when transmitting from an Apple device via “AirPlay” mode. 6.2.4 Screen Display ID Show device name and password when mirroring: Name (ID) and Wi-Fi-password can be shown or hidden at top status-line of main screen.
  • Page 65: Home Screen Background Image

    79060-WPS User Manual 6.2.5 Home Screen Background Image When powering ShareView Wireless the start screen will be displayed. User can change the background image of the Home screen. Select the image (jpg, bmp, png, gif with resolution 1920x1080 p.) from suitable directory and activate box for selection. You can return to Standard Home screen any time.
  • Page 66 ShareView Wireless 79060-WPS User Manual If you do not click the icon, the preview window bar will be minimized as below. www.tekvox.com...
  • Page 67: System Settings

    ShareView Wireless 79060-WPS User Manual After clicking the icon, the preview window will show a real-time preview. Otherwise, the preview window will only show a static picture as seen below. 6.4 System Settings 6.4.1 Buttons Show Device name, MAC Address, Serial Number, Device Version, Device Status, Last Action, and Item Operate.
  • Page 68: Date & Time

    ShareView Wireless 79060-WPS User Manual Paired: Shows properties of connected dongles that can be managed from this page. 6.4.2 Date & Time Includes Automatic date & time, Set date, Set time, and Select time zone.  Automatic date & time: Check to use an NTP time server to provide time as system time.
  • Page 69 ShareView Wireless 79060-WPS User Manual www.tekvox.com...
  • Page 70: Auto Standby

    79060-WPS User Manual 6.4.3 Auto Standby If the Auto Standby mode is activated, ShareView Wireless will automatically switch to power-saving mode a selectable time after the last dongle was plugged out, or Wi-Fi of a mobile unit was disconnected, or there is no operation at the system. Time is selectable from Never to 30 minutes. In Standby, green LED in top of Base-unit is flashing and HDMI-output is switched off.
  • Page 71: Language

    ShareView Wireless 79060-WPS User Manual 6.4.4 Language Select an installed display language. www.tekvox.com...
  • Page 72: Reset

    ShareView Wireless 79060-WPS User Manual 6.4.5 Reset Using factory reset to restore unit. 6.4.6 Configuration File Configuration File is a packaged file which contains all the configuration parameters of the WMS, which can be downloaded and copied to multiple devices which need to use the same configuration.
  • Page 73: Security Settings

    ShareView Wireless 79060-WPS User Manual 6.5 Security Settings 6.5.1 Security Level Based on user requirements, three different security levels can be set in the menu of Wireless Media, to satisfy different security requirements, according to different security sensitive environments or security policies. A security level is a predefined set of settings. Click on the corresponding entry in the menu if you want to adjust the respective security features.
  • Page 74: Login Password

    ShareView Wireless 79060-WPS User Manual 6.5.2 Login Password Change the admin password for entering the settings menu on a webserver. The default password, or after a RESET, is “admin”. You can change the password as you see fit. You can also deactivate the password entry, set the appropriate checkmark, and “Confirm settings”.
  • Page 75: Firmware Upgrade

    ShareView Wireless 79060-WPS User Manual 6.6 Firmware Upgrade 6.6.1 Firmware Update To upload local updating files to upgrade base unit. 6.6.2 Automatic Upgrading Click to choose upgrading from OTA via Internet or from local files. www.tekvox.com...
  • Page 76: Other Settings

    ShareView Wireless 79060-WPS User Manual 6.7 Other Settings 6.7.1 Auto Create Launcher Determines whether the Launcher program “Wireless Media” will be copied automatically on USB memory when using a USB memory at one USB-port of Base-unit. Enable or disable the corresponding box.
  • Page 77: Updating Wireless Media

    Firmware updates can be useful to take advantage of new features or to fix known issues and bugs. ShareView Wireless includes two methods of updating: Updating by USB stick and webserver. After updating the Base-unit, always check whether the other parts still fit together or should be updated also.
  • Page 78: Mac Os

    ShareView Wireless 79060-WPS User Manual 7.1.2 MAC OS Dongle/Launcher: Firmware version can be viewed in the “WirelessMedia.app” program icon in MAC OSX status bar by clicking the “WirelessMedia” icon and select “About”, as shown below. Click “About” to check dongle and launcher program.
  • Page 79 ShareView Wireless 79060-WPS User Manual 7.1.2.1 Firmware Not Matching When dongle firmware or “Launcher” firmware are an older version, or don’t match with the base unit version, it shows a “WirelessMedia ATTENTION” alert message box in the window OS or MAC OSX, as below.
  • Page 80: Upgrading Firmware Of Base Unit

    ShareView Wireless 79060-WPS User Manual 7.2 Upgrading Firmware of Base Unit There are two ways to upgrade base unit as shown below. First method to upgrade base unit: The base unit device can be updated through a USB drive as below.
  • Page 81: Upgrading And Pairing Dongle

    ShareView Wireless 79060-WPS User Manual When the associated Release notes require an additional Factory Reset, perform it via the menu “System settings” / “Reset” on the webserver console menu. Note: All configuration data will be lost. So that you do not have to re-configure all data in an elaborate process, note all current settings within the Sub-menus before doing a Factory Reset.
  • Page 82: Upgrading Launcher

    ShareView Wireless 79060-WPS User Manual 2. “Pairing” to the Base-unit is done automatically afterwards, it shows as below 3. Remove the dongle. Now, the upgrading progress is finished. Update all other dongles accordingly. 7.4 Upgrading Launcher Note: The USB driver should be FAT 32 format, not NTSC format.
  • Page 83 ShareView Wireless 79060-WPS User Manual Method 2: Via WIFI 1. Connect PC to WMS’s SSID and enter password in homepage, see pictures as below: 2. Open Browser and enter Wi-Fi IP: 192.168.43.1:8000. 3. Click to enter “Launcher” download webpage. Shown as below: 4.
  • Page 84: Clean Leftover Files Of Older Versions Of Launcher Program In Laptop

    ShareView Wireless 79060-WPS User Manual Two methods to execute the launcher for first time user  Copy the program to PC and click to execute it to share PC screen.  Connect dongle to PC; click to run program from the USB drive and share PC screen.
  • Page 85: Operation Guide

    ShareView Wireless 79060-WPS User Manual 3. Right-Click on the “*.service” or “*.serviceC3” “WirelessMediaAutoServiceC3.exe” as shown below, and click End Process. 4. Check the task manager again to be sure there are no more “WirelessMedia” programs still running . And check again to be sure there is no more any “WirelessMedia” in the C:\Users\***(userame)\AppData\Local\”WirelessMedia”.
  • Page 86 ShareView Wireless 79060-WPS User Manual When the Launcher program was already installed and run the first time, plug in dongle and continue to step 2. When Launcher program has not yet been installed on PC, refer to chapter 7.4. 1. Plug a dongle in to the USB port of your PC or Laptop. The Wireless Media application will start automatically, and a symbol is displayed in the task bar of the PC/laptop 2.
  • Page 87: Microsoft Windows Pc/Laptop Without Dongle

    ShareView Wireless 79060-WPS User Manual 8.1.3 Microsoft Windows PC/Laptop Without Dongle First time users have to copy the Launcher program “Wireless Media for Windows” on your Laptop. When the Launcher program is already loaded, continue with Step 2. 1. If Launcher program is not yet installed on PC, refer to chapter 7.4.
  • Page 88 ShareView Wireless 79060-WPS User Manual 4. Enter base unit password and click “connect”, and the system will be ready to share. You can also manually connect by entering the name (SSID) or IP address. (click icon ). Enter the corresponding base unit password, press 'OK', and the system is “Ready to share”.
  • Page 89: Options For Microsoft Windows Pc/Laptop - Extended Screen

    ShareView Wireless 79060-WPS User Manual Right click the WirelessMedia status icon in the Windows taskbar to open up the context menu. About: You can check the software versions of the Base-unit, the dongle and the launcher program. Exit: Completely exit the App.
  • Page 90 ShareView Wireless 79060-WPS User Manual Options: Extended Screen: Transfers extended desktop of active source. (Depending on your operating system, may require the installation of the virtual driver “ExtendedDisplay” to function with Windows 10). The primary screen (1) is displayed on the laptop and the virtually extended screen (2) is displayed on the main screen.
  • Page 91 ShareView Wireless 79060-WPS User Manual Keep Aspect Ratio: Keep the original aspect ratio to display on the main screen. Stream Mode:  Fluency Priority: Default  Quality Priority: Better quality on video and audio. Low Latency Mouse: The setting is applied individually for this laptop only. The shape of mouse-pointer is equal to its shape in the application.
  • Page 92: Mac Os Pc/Laptop With Dongle

    ShareView Wireless 79060-WPS User Manual 8.1.5 MAC OS PC/Laptop with Dongle At least operation system macOS 10.9 is required. For first-time users, you have to copy the Launcher program “Wireless Media for MAC” first on your Laptop. Run this Launcher program. When the Launcher program “Wireless Media for MAC” is already loaded, continue with Step 2.
  • Page 93: Mac Os Pc/Laptop Without Dongle

    ShareView Wireless 79060-WPS User Manual 8.1.6 Mac OS PC/Laptop without Dongle For first time users, you have to copy the Launcher program “Wireless Media for Mac” first on your Mac. When the Launcher program is already loaded, continue with Step 2.
  • Page 94: Options For Apple Macos, Macbook - Extended Screen

    ShareView Wireless 79060-WPS User Manual 8.1.7 Options for Apple MacOS, MacBook – Extended Screen Click the icon in App to open/close “options.” Options: Extended Screen: Transmits the Extended desktop (“Use a Separate Display”) only via AirPlay when activated for Display on Wireless Media.
  • Page 95: Transmitting Ios Mobile Device

    ShareView Wireless 79060-WPS User Manual 8.2 Transmitting IOS Mobile Device 8.2.1 How to use AirPlay? AirPlay: Wireless Media Base Unit supports “Airplay”, which enables projecting the desktop of your Apple device such as iPhone, iPad etc. onto the main screen. (Note: iOS devices must first be connected to the Wi-Fi of “WirelessMedia”).
  • Page 96 ShareView Wireless 79060-WPS User Manual 3. The main interface of “WirelessMedia2” is shown below. Click the device list refresh button , which is shown below: 4. Select the base unit you want to connect, and then enter the password and project.
  • Page 97: Wi-Fi Recommendation Setting

    ShareView Wireless 79060-WPS User Manual 5. When sharing to the main screen, it shows OSD “Welcome ***” on the home page. For example, if we connect it via a Moto G PLA-AL00, it shows a “Welcome Moto GPLA-AL00” on screen, as shown below.
  • Page 98: Check The Wi-Fi Rssi On Dongle Or Mobiles

    ShareView Wireless 79060-WPS User Manual 9.2 Check the Wi-Fi RSSI on Dongle or Mobiles Use a Wi-Fi analysis software to place the base unit on the same network as the dongle or mobiles to measure the Wi-Fi RSSI (Received Signal Strength Indicator). We recommend the RSSI be above - 70dB to be good enough to keep a stable signal transmission.
  • Page 99 ShareView Wireless 79060-WPS User Manual  Put the base unit closer to the main screen. Low signal strength:  Change the orientation of  Metal cabinets, walls, the antennas at the rear construction elements, panel of base unit to the …can cause reflections...
  • Page 100 ShareView Wireless 79060-WPS User Manual  The media-player is not ideal.  Use another media-player  The video quality also (VLC player…), another depends on the computing browser. power of the PC / laptop  Update the software of your...
  • Page 101 ShareView Wireless 79060-WPS User Manual If it fails, the LEDs on the button start blinking red. Unplug the button from your laptop and try a new button. The displays are switched Switch on the display off. The display cable is not...
  • Page 102 ShareView Wireless 79060-WPS User Manual “Wireless Media” or “Video Playback”. The software of used Video- Update Video-player. Try player is not actual another player. Check the filter-settings in An active virus scanner can Virus scanner. block the Audio. De-activate the player for a check.
  • Page 103 ShareView Wireless 79060-WPS User Manual b.) Streaming: Videos (Internet, YouTube); the image will not be displayed on the iOS device. => picture is jerky Operation System Can’t work with Android device? Requirement Android 2.3 and Update to the later OS later (WirelessMedia app) www.tekvox.com...

This manual is also suitable for:

79060-wps

Table of Contents