Advertisement
Quick Links
Advertisement
Summary of Contents for NewStar Neomounts Pro NMPRO-M12
-
Page 2: Section(1) With Wheels
OVERVIEW Section(1) With Wheels Page 2 Section(2) With Floor Plate Page 14... - Page 3 This instruction is applicable to all the following models and related extended products Section(1) With Wheels NMPRO-M12 NMPRO-M21 NMPRO-M22 (With fixed arms) (With fixed arms) (With micro-adjustment arms) Page 12 NMPRO-M32 NMPRO-M33 (With micro-adjustment arms) (With micro-adjustment arms)
- Page 4 Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation. This products should only be installed by someone who has a basic knowledge of building constructio installations and fully undestnd these instrudtions. Always have someone assit you to lift and position your equipment.
-
Page 5: Required Tools
Parts list (NMPRO-M32) C2/C3 M5X15 M6X15 M8X15 M8X12 M8X12 M8X45 Ø6XØ6.2X1.5 Ø6XØ8.2X1.5 3’’ 3’’ 1800mm 750mm 1200mm 1000mm*6+480mm*2 Parts list (NMPRO-M33) M5X15 M6X15 M8X15 M8X12 M8X12 M8X45 Ø6XØ6.2X1.5 Ø6XØ8.2X1.5 3’’ 3’’ 2700mm 1000mm 1200mm 1000mm*9+480mm*3 Required Tools " " Wood Bit Masonry Bit Socket Set Phillips Screwdriver... -
Page 6: Installation
Installation Locked the wheels first C2/C3 Repeat... - Page 7 NMPRO-M32 NMPRO-M33 NMPRO-M21 NMPRO-M22...
- Page 8 Exchangable plate: NMPRO-SFPLATE NOTES: each pillar B6 (NMPRO-M21) 4PCS each pillar Marking line B6 (NMPRO-M22) 8PCS each pillar B6 (NMPRO-M32) 8PCS each pillar B6 (NMPRO-M33) 12PCS NOTES: Mark the lines in same Lock D4 into the height on the pillar marked line position...
- Page 9 1000mm 480mm 1000mm Lock on NMPRO-M21 NMPRO-M22 480mm 1000mm 480mm 1000mm 1000mm NMPRO-M32 NMPRO-M33 480mm 1000mm...
- Page 10 Cable Management A1/A2/A3...
- Page 11 Adjust the vertical position of TV ±3° Height ±3° adjustment 10mm ±3° wire cable...
- Page 12 Tilt Adjustment +3°/-3° Adjust the single knob Depth Adjustment 15mm Adjust the both knobs Tilt Adjustment +3°/-3°...
- Page 13 Parts list (NMPRO-M12) C2/C3 M5X15 M6X15 M8X15 M8X12 M8X12 M8X45 Ø6XØ6.2X1.5 Ø6XØ8.2X1.5 3’’ 3’’ 1800mm 750mm 680mm*2 Installation Locked the wheels first C2/C3...
- Page 14 8PCS Tag line Lock D4 into the marked line position Please refer to page 9 and 10 for the remaining steps.
- Page 15 Section(2) With Floor Plate NMPRO-S1 NMPRO-S12 (With fixed arms) (With fixed arms) NMPRO-S21 NMPRO-S22 (With micro-adjustment arms) (With fixed arms) NMPRO-S32 NMPRO-S33 (With micro-adjustment arms) (With micro-adjustment arms)
- Page 16 Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation. This products should only be installed by someone who has a basic knowledge of building constructio installations and fully undestnd these instrudtions. Always have someone assit you to lift and position your equipment.
- Page 17 Parts list (NMPRO-S21) Ø6XØ6.2X1.5 M5X15 M6X15 M8X15 M8X12 Ø6XØ8.2X1.5 Lag bolt M8X45 M8X12 Anchor Ø6XØ8.2X1.5 Rubber Pad 1500mm 1000mm*1+480mm*2 Parts list (NMPRO-S22) Ø6XØ6.2X1.5 M5X15 M6X15 M8X15 M8X12 Ø6XØ8.2X1.5 Lag bolt M8X45 M8X12 Anchor Ø6XØ8.2X1.5 Rubber Pad 1800mm 1000mm*2+480mm*4 Parts list (NMPRO-S32) Ø6XØ6.2X1.5 M5X15 M6X15...
- Page 18 Parts list (NMPRO-S33) Ø6XØ6.2X1.5 M5X15 M6X15 M8X15 M8X12 Ø6XØ8.2X1.5 Lag bolt M8X45 M8X12 Anchor Ø6XØ8.2X1.5 Rubber Pad 2700mm 1000mm*9+480mm*3 Required Tools " " Socket Set Phillips Screwdriver Pencil Level Measuring Tape Drill Stud Finder Wood Bit Hammer Masonry Bit Installation...
- Page 19 Fix assembly to floor a. Concrete b. Wood floor NOTES: each pillar B6 (NMPRO-S1) 4PCS each pillar B6 (NMPRO-S21) 4PCS each pillar B6 (NMPRO-S12) 8PCS each pillar B6 (NMPRO-S22) 8PCS each pillar B6 (NMPRO-S32) 8PCS each pillar B6 (NMPRO-S33) 12PCS NOTES: Mark the lines in same height on the pillar...
- Page 20 NMPRO-S33 NMPRO-S22 NMPRO-S32 Exchangable plate: NMPRO-SFPLATE...
- Page 21 1000mm 480mm 1000mm Lock on NMPRO-S21/NMPRO-S22 480mm 1000mm 480mm 1000mm NMPRO-S32/NMPRO-S33 1000mm 480mm 1000mm...
- Page 22 Cable Management A1/A2/A3...
- Page 23 ±3° Adjust the vertical position of TV ±3° ±3° Wire Height adjustment 10mm...
- Page 24 Tilt Adjustment +3°/-3° Adjust the single knob Depth Adjustment 15mm Adjust the both knobs Tilt Adjustment +3°/-3°...
Need help?
Do you have a question about the Neomounts Pro NMPRO-M12 and is the answer not in the manual?
Questions and answers