Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for iMars J03
- Page 1 CAR JUMP STARTER USER MANUAL...
- Page 2 Product Overview NO. Function Operation ON/OFF Button Press the button to charge your devices. (Multifunctional) Press the button to see the remaining capacity. Long press the button to turn on/off the flashlight. LED Display Screen Shows the percent power. Shows charge and discharge status. Shows wireless charging status.
- Page 3 wireless charging option. USB C Input Port Charge the jump starter (via USB-A to USB-C cable). Output Port Charge your devices (QC 3.0 compatible) faster, with 75% (QC 3.0) increase in speed. Jump Starting Port Insert the plug into the jump starting port. LED Flashlight Flashlight modes: Solid, SOS, Alert, and Off Black Clamp...
- Page 4 100%. 3. Unplug the cable when no charge is required. NOTE: ▪ When using product for the first time, please make sure that the jump starter is fully charged. ▪ Please use the provided USB C cable to charge the product. ▪...
- Page 5 adjust the orientation to have the best charging. NOTE: The wireless charging feature only works on devices that allow Qi (inductive) wireless charging. Only use the wireless charging pad with Qi-certified devices. LED flashlight Long press ON/OFF button for 3 seconds to turn on the light. Press ON/OFF button shortly to switch modes among Solid, SOS, Alert and Off.
- Page 6 Step 2: Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery. If the green and red light indicators on the battery clamp are flashing alternately, you are safe to move on to to the next step.
- Page 7 ▪ If you failed to start your car, you need to disconnect the battery clamp from the vehicle and the jump starter. Wait for at least 30 seconds, then try again. ▪ If you failed to start your car after 3 attempts, you can use the force start function.
- Page 8 If any of the following situations, the smart clamp turns protection on. LED Indicator Situations The red/green light will flash Ready to work The red/green light will flash Work status The red light is always on 1. Battery clamp is reversely connected. -Check whether the clamp is reversely connected.
- Page 9 Cautions 1. Use the original smart battery clamp to start the car. 2. Do not use this unit if any cable clamp or cord is damaged. 3. Do not connect two clamps together when the product is turned on. Do not connect both cable clamps to the same piece of metal. Otherwise, the jump starter will be damaged.
- Page 10 Specifications Brand iMars Model Capacity 16000mAh/59.2Wh Type C input 5V/2A USB output 5V/3A, 9V/2A, 12V/1.5A Wireless Charging 5V/2A, 10W max Start current 650A (last for 1s) Peak current 1300A (last for 0.2s) Short circuit protection Effective ≦13V±0.3V Over-discharge protection Over-temperature protection >...
- Page 11 A: About 5 hours through the Micro USB input port or Type C input port. Q: How many times can this product start the vehicle with full capacity? A: About 15 times. Q: How many times can this product fully charge my cell phone? A: It depends on the battery capacity of your cell phone.