Table of Contents
Advertisement
Quick Links
Hemingworth Thread Cabinet
Identifying the Parts
Pin Depth
Guage
Safety
Bracket
22x Pins
Wall-Mount Plugs
and Screws
Backing Joiner
14x Drawer
Runners
You'll Also Need:
- Phillips head screwdriver
- Large flat-head screwdriver
- Drill with No. 2 Phillips bit
(optional, recommended)
Assembly Instructions
22x Twistlocks
4x Small
Clamps
42x Drawer
Screws
12x Dowels
2x Backing
Boards
Back Support - Top (BT)
Back Support - Bottom (BB)
The thread cabinet is
packaged in two separate
cartons. Depending on
how the cabinet is
delivered, both cartons
may not necessarily
arrive together.
Bottom
Panel (B)
Left Panel (L)
Front Panel (F)
Wall Mount (W)
Drawers
Cabinet Frame
Top
Panel (T)
Right Panel (R)
Advertisement
Table of Contents
Summary of Contents for Hemingworth Thread Cabinet
- Page 1 Hemingworth Thread Cabinet Assembly Instructions The thread cabinet is Identifying the Parts packaged in two separate cartons. Depending on how the cabinet is Pin Depth delivered, both cartons 22x Twistlocks Guage may not necessarily arrive together. 4x Small Clamps Drawers...
- Page 2 1. Attach Hardware to Panels Insert 9 Pins in each Left (L) and Right (R) Panel as shown • Place Left (L) and Right (R) Panels on a flat surface as shown • Place seven of “Left” drawer runners on the Left Tip: Use the Pin Panel (L).
- Page 3 Pieces will not fit together unless Twistlocks are pointing in the right direction. Back Support Bottom (BB) Back Support Top (BT) Front Panel (F) (”Hemingworth” on other side) Top Panel (T) (rear) (rear) (top, outside) (inside)
- Page 4 2. Assemble Top Fit together and tighten as shown. Tighten Twistlocks by rotating clockwise. Pin and adjoining panel should be pulled together tightly. 2. Tighten 2. Tighten Tightened Open 2. Tighten 2. Tighten Groove 3. Fit Together F r o n t P a n e l 2.
- Page 5 3. Fit Together (continued) is tl o c k s 2 . T ig h te n T w id e O n R e v e rs e S 1. Push Together l o c k s T w i s t l ( B ) h t e n P a n e...
- Page 6 Safety Information 5. Assemble the Drawers WARNING: If the thread cabinet is not mounted or anchored securely, it could topple forward and cause serious injury. Affix two runners to each of the top 7 drawers as shown. Ensure it is fastened before use.
Need help?
Do you have a question about the Thread Cabinet and is the answer not in the manual?
Questions and answers