FingerEze HC-WATCH Manual

Includes:
• Watch Camera
• Instructional manual
• USB Adaptor
Operation:
1. To turn on the camera you will need to press and hold the power button for two seconds until the blue light turns on and is
solid. (The power button is the bottom left one when looking at the watch face.)
2. When you turn on the camera the light will be solid blue showing it is in standby mode.
3. To start the recording you will need to press the power button for one second. The blue light will flash three times then go
off. The item is now recording video and will stay on until you stop it or the battery goes dead.
4. To save the video you will press the power button and the blue light will flash three times saving the video and going back
into the standby mode.
5. To turn the power off you will stop any video recording and let it save. Once you are back in the standby mode (solid blue
light) hold the power button for three seconds and the red light will flash and turn off. (When the battery is dead or if the
memory is full it will save the recorded video and turn itself off automatically.)
6. To take a picture you will need to turn on the camera. When in standby model you can press the top left button to take a
single photo. The red light will flash once confirming it was taken.
Connecting to PC:
1. Take the USB cable that came with the watch and insert it into your PC USB port.
2. Now take the smaller end and plug it into the side of the watch behind the cover. You will need to unscrew the button on
the left side of the watch to insert the USB cable. (The cover looks like a normal button but can be unscrewed.)
3. Now you might have a screen pull up asking you what to do. You need to select the option to open to view the files to go
into where it stores the video.
4. If your PC does not come up with anything automatically don't worry. You just need to select it manually.
5. Go to your start button in the taskbar on your desktop and click on it. Now on the right near the top you will need to click
on Local PC or My Computer depending on your version of windows.
6. Once you click on Local PC it will pull up the list of hard drives and other removable devices.
7. Under the section that says Devices with Removable Storage you need to select the Removable Disk folder to continue.
8. When you open the folder you will see a second folder named DCIM. This is where it stores the video and images you took
when recording.
9. Go into this folder and you will see the video clips you took and you can view them by clicking on them.
10. If you have trouble playing the video on your PC I would suggest you download the free player named "VLC Media Player"
and can be found to download on the internet.
11. When you need to remove the camera from the USB cable that connects it to your PC. You will need to close the window
for the item and safely remove the device before doing so. There is an icon that appears down by your clock when you
connect a USB device. This looks like a green arrow above a grey box. If you click on this you can select to safely remove the
device that is connected to your PC.
12. Doing this will prevent the item and data from being lost or damaged.
Charging:
1. Take the USB cable that came with the watch and insert it into your PC USB port.
2. Now take the smaller end and plug it into the side of the watch.
3. Once connected correctly the blue light will be on showing it is connected to the PC.
4. When the camera is connected and the blue light is on you will also see a red light flashing in the same place as the blue
light. When the red light is flashing it means the camera is charging. When the red light stops flashing it is finished and fully
charged.
5. When I tested this item is was hard to see the red flashing light unless I held the watch at a certain angle.
HC‐WATCH
Watch Video Camera Built‐in DVR