Advertisement
Advertisement
Table of Contents
Related Manuals for Flux Phenom MAGNETIC SCREEN DOOR
Summary of Contents for Flux Phenom MAGNETIC SCREEN DOOR
- Page 2 Visit FluxPhenom.com for our instructional installation videos! Instructions for Mounting to Wooden Door Frame What you will need: • Hammer • Stool or chair to stand on (optional, to help reach top of door frame) • A second person to assist is recommended Steps: Remove the screen door from the package and unfold it on the floor or table.
- Page 3 Hemming the screen door (skip this step if no hemming is necessary) 1) As you're holding the screen door up to the door frame, find the point at the top seam of the screen door where it sits about a 0.5 cm off the ground. Place your finger at that point. 2) Fold the screen door at that point.
- Page 4 2) When inserting the thumbtacks along the top seam, always check to make sure that the bottom of the screen door is still about a 0.5 cm off the ground. The top seam should look like this once completed: Mounting the side seams of the screen door: Insert thumbtacks on each side of the screen door. The spacing of each thumbtack should be about 30 cm apart.
- Page 5 Instructions for Mounting to Metal or Aluminum Door Frame: What you will need: •Stool or chair to stand on (optional, to help reach top of door frame) •A second person to assist is recommended •Scissors •Paper towels •Any type of cleaning detergent and isopropyl rubbing alcohol •If "hemming"...
- Page 6 In order to secure the hem points, you can use a stapler or mini binder clips. If you use binder clips, once the clip is fastened to the mesh, you can remove the metal pieces. Once the hem is complete across the entire top seam of the screen door, simply take the screen door and attach it to the hook-and-loop tape that is on the door frame.
Need help?
Do you have a question about the MAGNETIC SCREEN DOOR and is the answer not in the manual?
Questions and answers